Vivo MOUNT-VW01A User manual

Single Monitor Wall Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vw01a
SKU: MOUNT-VW01A
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
17.6lbs
(8kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
A (x1)
Wall Bracket
M-A (x4)
M4x12
M-B (x4)
M5x12
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
M-C (x4)
D5 Washer
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ASSEMBLY STEPS
STEP 1
Loosen the screw from the adjustable
support bracket attached to (A1) and
slide o the VESA plate (A2).
W-A (x4)
ST4x30
Screw
W-B (x4)
Drywall
Anchor
Place the wall bracket (A) against the wall
at the desired location and mark drilling
locations with a pencil. Use of a level is
recommended.
If mounting to wood, drill 1.75” (45mm)
deep holes using a 3/32” (2.5mm) drill
bit. For drywall, drill holes using a 5/16”
- 25/64” (8 - 10mm) drill bit, then squeeze
and insert the drywall anchors (W-B) into
the holes.
Mount the wall bracket using the ST4x30
screws (W-A), making sure the opening in
the adjustable support is facing up.
STEP 2
TOOLS NEEDED: Phillips Screwdriver

3
STEP 3
STEP 5
Mount the VESA plate (A2) to the back of the monitor using bolts (M-A, M-B) with washers (M-C).
STEP 4
Place the VESA plate (A2) with monitor into the adjustable support of the wall bracket (A1), then
tighten the screw on the side to secure the monitor.
To raise the monitor, slowly move the monitor up
until the latch engages at the desired height. To
lower the monitor, first raise all the way up, and
then slowly set back down to the bottom position.
A1
A2

LAST UPDATED: 09/09/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303