Vivo MOUNT-VW090F User manual

Ultra Heavy Duty TV Wall Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vw090f
SKU: MOUNT-VW090F
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED 154lbs
(69.86kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x2)
Mount
B(x1)
Center Plate
C(x8)
M5x6
M-F (x4)
D5 Washer
M-G x4)
D8 Washer
M-H (x8)
5mm Spacer
W-A (x6)
Bolt
M-E (x4)
M8x50
M-A (x4)
M5x14
M-B (x4)
M6x14
M-C (x4)
M6x30
M-D (x4)
M8x30
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
W-C (x6)
Washer
W-B (x6)
Anchors
Drill
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 309-278-5303.
D (x2)
VESA Bracket
E (x8)
M4x6
F(x1)
Bubble Level
M-I (x8)
15mm Spacer
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
Extend Mounts (A) to full height and secure vertical arms with M4x6mm Bolts (E).
Assemble mounts using Center Plate (B) and M5x6mm Bolts (C).
A
C
B
E

4
STEP 2
OPTION A: Wood Wall
Use mount (A) with Bubble Level (F) to
mark drilling locations on wall where
studs are located. Using a 5/32” (4mm)
drill bit, drill holes at least 2.2” (55mm)
deep into marked locations. Secure
Mount to wall using Bolts (W-A) and
Washers (W-C).
OPTION B: Concrete/Brick Wall
Use mount (A) with Bubble Level (F) to mark
drilling locations on wall. Using a 3/8” (10mm)
drill bit, drill holes at least 2.4” (60mm) deep
into marked locations and insert Anchors (W-B).
Secure Mount to wall using Bolts (W-A) and
Washers (W-C).
ø 4.5mm
55mm
(2.2”)
55mm
(2.2”)
N
P
O
uu
√
F
X
W-A
W-C
60mm
ø 10mm
(ø 3/8")
(2.4")
60mm
(2.4")
W-A
W-C
W-B
F
uu
√
O
N

5
STEP 3
OPTION A: Flat Back TV
Attach VESA Brackets (D) to back of TV using
Bolts (M-A, M-B) and Washers (M-F, M-G)
with a Phillips head screwdriver.
TV
M-C
M-D
M-G
M-H
M-C
M-D
M-G
M-I
M-C
M-D
M-G
M-I
M-H
M-E
M-G
M-I
M-E
M-G
M-I
M-H
M-E
M-G
M-I
M-H
M-A
M-F
M-B
M-G
OPTION B: Curved Back TV
Attach VESA Brackets (D) to back of TV using
Bolts (M-C, M-D, M-E), Washers (M-G) and
Spacers (M-H, M-I) with a Phillips head
screwdriver.

6
STEP 4
Hang TV with VESA brackets onto Mount, then push back until you hear a click from
each bracket to indicate the locks are engaged. Keep pull cords hidden by attaching
magnetic end to any part of the mount.

7
STEP 5
To remove TV, pull down on pull cords at the same time to release locks, then li TV o
from mount.

LAST UPDATED: 06/15/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303