Vivo STAND-GM1BB User manual

Single Gaming Pneumatic Monitor - Blue LED Lights
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-gm1bb
SKU: STAND-GM1BB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3
ASSEMBLY STEPS
OPTION A: 15 - 60mm Desk
Loosen the hand bolt on the clamp (C) to fit the desk thickness. Place the clamp on
the desk edge and tighten, then press the base cover (B) over the top of the clamp.
PACKAGE CONTENTS
TOOLS NEEDED
0 - 17.6lbs
(0-8kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Arm
B(x1)
Base Cover
C(x1)
Clamp
M-A (x4)
M4x12
M-B (x4)
M4x30
M-C (x4)
Spacer
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
D(x1)
VESA Plate
E(x1)
LED Power
Cable
F (x1)
M4x10 Bolt
G(x1)
3mm Allen
Wrench
H (x1)
5mm Allen
Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
NOTE: SOME HARDWARE MAY NOT BE USED
PER SCREEN
Do not overtighten screw!
STEP 1
OPTION B: 60 - 90mm Desk
If the desk thickness is greater than 60mm (2.36”), remove the two bolts from the back of
the clamp (C) using the 5mm Allen wrench (H). Reattach the clamp to the lower portion
of the clamp base. Loosen the hand bolt on the clamp to fit the desk thickness. Place the
clamp on the desk edge and tighten, then press the base cover (B) over the top of the
clamp.

4 5
STEP 3
OPTION A: Flat Screen Monitors
Attach the VESA plate (D) to the monitor using M4x12 bolts (M-A), making sure the opening
is facing towards the bottom of the monitor, and tighten with a Phillips screwdriver.
STEP 4
Slide the monitor with VESA plate (D) onto the head of the arm (A), and secure using the
M4x10 bolt (F) with a Phillips screwdriver.
STEP 2
Place the arm (A) on top of the base (C), then tighten the screw on the back of the arm
using the 3mm Allen wrench (G). Swivel tension may also be adjusted using this screw.
STEP 3 (Continued)
OPTION B: Curved Screen Monitors
Attach the VESA plate (D) to the monitor using M4x30 bolts (M-B) and spacers (M-C),
making sure the opening is facing towards the bottom of the monitor, and tighten with a
Phillips screwdriver.

6 7
Plug the LED power cable (E) into the connectors on the back of the arm (A) and base
cover (B), then connect to a USB port on the computer to power on.
STEP 6
Remove the cable covers from the arm (A) by sliding each one forward and o (loosen
screws for upper cover if needed). Run cables through the upper cover and lower arm,
then reinstall the covers.
STEP 7
STEP 5
If needed, adjust the gas spring in the arm (A) to support the monitor using the 5mm Allen
wrench (H) . While holding the arm in the straight forward position, turn the screw in back
clockwise to decrease support, and counter-clockwise to increase. Adjust the tilt support
by turning the bolt immediately behind the tilt joint, and the swivel by turning the bolt on
the back of the bracket.
Loosen

LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303