Vivo STAND-V011H User manual

Single Monitor Extra Tall Desk Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v011h
SKU: STAND-V011H
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
A (x1)
VESA Plate
B(x1)
Bracket
C(x1)
Base
J (x1)
Thumbscrew
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x1)
Pole
E(x1)
Pole
F (x1)
Pole
G(x1)
Pole Cap
H (x2)
Pole Connector
I (x3)
Cable Clip
K (x3)
Bolt
M-A (x4)
M4x12
M-B (x4)
M4x16
M-C (x4)
M5x12
L(x1)
3mm Allen
Wrench
M (x1)
4mm Allen
Wrench
N (x1)
6mm Allen
Wrench
M-D (x4)
M5x16
M-E (x4)
D5 Washer
M-F (x4)
Spacer
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
22lbs
(9.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
Attach pole (D) to base (C) using bolts (K) and tighten using 4mm allen key (M). Slide cable
management clip (I) over top of pole (D). Attach poles (E,F) to pole (D) using pole connector (H) as
shown in diagram. Add cable management clips (I) and pole cap (G). Tighten grub screws in pole
connectors (H) using 3mm allen key (L).
H
K
M
I
G
L
I
I
I
H
D
E
F

4
STEP 2
OPTION A: Flat Back Monitor
Attach VESA plates (A) to back of monitors using bolts (M-A,M-B,M-C,M-D) and washers (M-E).
STEP 3
Attach bracket (B) to pole assembly and tighten using 6mm allen key (N).
B
F
N
M- A
M- C
M- E
A

5
STEP 3 (Continued)
OPTION B: Curved Back Monitor
If bolts are too long, spacers (M-F) may be required.
STEP 4
Slide VESA plate (A) into bracket (B) and secure using thumb screw (J).
M- B
M- D
M- E
A
J

6
STEP 5
Adjust tension in monitor bracket with 6mm allen key (N) as shown in diagram.
STEP 6
Route cables through cable management clips (I).
N

7
STEP 7
Store allen keys (N,M) in cable management clip (I) for future adjustment.
Adjust as Desired
M
N
360°
360
°
+45°
-45°
180°

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303