Vivo STAND V102C User manual

  
 
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-  
 
phillips screwdriver
 
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
-  (x4)
M5x12
-  (x4)
M4x12
-  (x4)
M4x16
 (x2) (x2)  (x1)  (x2)
! (x2) " (x1) # (x1) $ (x1)
% (x5) & (x3) ' (x1)  (x4)
 (x2)  (x3)
- ! (x4)
D5
-  " (x4)
-  (x4)
M5x16
- -())** +,)) *
 (x1)
4mm Alle Key
- (x5)
. (x1)
6mm Alle Key

,/0 
 
Install pole cap (H) to top of pole (G).
Assemble pole (G) to clamp base (F) with bolts (N) using 4mm Allen key (P). Install pads
(O), and clamp to desktop.
 
- 
-
Remove screw from clamp bolt, and remove clamp bolt from clamp (F). Install pads (O)
to grommet base (J). Align pin on top of grommet base (J) with the small hole on the
bottom of pole (G), position over hole in desktop, and install to desktop using clamp
bolt and grommet plate (K).
2
 1
For flat back monitor, install VESA plate (A) to monitor using bolts (M-A) or (M-C) and
washers (M-E).
 2
- 
-
For curved back monitor, install VESA plate (A) to monitor using bolts (M-B) or (M-D),
washers (M-E), and spacers (M-F).
Install swivel arms (B) and cable clip (I) to pole (G). Fasten the
bolts with the supplied 6mm Allen key (Q).

 3
 4
Slide the monitors onto the heads of swivel arms (B). Install thumb screw (M). Make
sure the screw is installed before you rotate the monitor.
If needed, adjust the bolt on the side of the hinge behind the VESA plate to tighten
or loosen the tilt angle.
 5
 6
Mount assembled laptop tray to VESA plate (A) using bolts (L).
Install horizontal supports (D) to laptop tray (C) using square clips (E).
 7
Slide the laptop tray onto the head of
swivel arm (B).
Install thumb screw (M).
3

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
80 9
  
Last updated: 0 /01/18
 
 
Loosen clips on horizontal supports and adjust the width to fit your laptop.
Store the Allen keys in cable clip (I) for future use.
 
 1
Manage the cables using the installed cable clips.
4