Vivo STAND-TV07-S User manual

Black TV Stand with Storage Shelf
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv07-s
SKU: STAND-TV07-S
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-I x2)
M6x60mm
Socket Head
Bolt
H(x1)
Shelf
I(x1)
Shelf Bracket
A (x1)
Base
B(x2)
Feet
C(x1)
Center Pole
S-B (x8)
M5 Lock Nut
S-C x5)
M6x65mm
Carriage Bolt
S-D (x5)
M6 Washer
S-E (x5)
M6 Lock Nut
S-A (x8)
M5x10mm
Screw
E (x2)
VESA
Adapter
F (x2)
VESA
Adapter
G (x1)
Plastic Cover
S-G (x4)
M6x12mm
Screw
S-F (x1)
M6 Flange
Nut
T-A x1)
4mm Allen
Wrench
T-B x1)
5mm Allen
Wrench
M-F (x4)
M8 Washer
M-G (x8)
Spacer
M-E (x4)
M5 Washer
M-A (x4)
M4x14mm
Screw
M-B (x4)
M5x14mm
Screw
M-D (x4)
M8x20mm
Screw
M-C (x4)
M6x14mm
Screw
T-C x1)
Wrench
D (x1)
VESA Plate

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
SHELF
44lbs
(20kg)
TV
Attach Base (A) to Feet (B) using M6x65mm Carriage Bolts (S-C), M6 Washers (S-D), and M6 Lock
Nuts (S-E). Tighten using provided Wrench (T-c).
A
B
T-C
S-E
S-D
S-C
STEP 2
Remove the two bolts, four washers, and
two nuts from the Center Pole (C) using Allen
Wrench (T-A) and Wrench (T-C).
Separate into two halves.
T-C
T-A
C

4
STEP 3
Slide Plastic Cover (G) over lower portion of
Center Pole (C).
Slide the top half of the pole back into the lower
half and secure using the hardware you removed
in step 2, Allen Wrench (T-A), and Wrench (T-C).
G
T-A
T-C
STEP 4
Attach Center Pole (C) to Base (A) using Carriage Bolt (S-C), M6 Washer (S-D), and M6 Lock Nut (S-E)
through the front of the base. Use M6x12mm Screws (S-G) to secure the top. Tighten using Allen
Wrench (T-A) and Wrench (T-C).
S-G
T-A
S-C
S-D
S-E
T-c
C

5
STEP 5
OPTION A: VESA Plate Only
Use Screws (M-A or M-B) along with Washers (M-E) to attach the VESA Plate (D) without the
adapters to the TV monitor.
M-A/M-B
M-E
D
F
E
S-B
T-C
S-A
DD
F
E
T-C F
E
F
E
S-A
S-B
OPTION B: VESA Plate with Adapters
For TVs with VESA mounts at 200mm x 200mm or 200mm x 100mm, VESA Adapters (E,F)
are required. Attach Adapters to VESA Plate (D) using M5x10mm Screws (S-A) and M5 Lock
Nuts (S-B). Tighten using Wrench (T-C) and a Phillips screwdriver.

6
STEP 6
M-A/M-B/M-C/M-D
M-A/M-B/M-C/M-D
M-E/M-F
M-D
M-D
M-F
M-G
M-F
STEP 5 (Continued)
OPTION B: VESA Plate with Adapters (Continued)
Use Screws (M-A thru M-D) along with Washers (M-E, M-F) to secure VESA plate with the adapters to
the back of your television. Make sure the “VIVO” logo is right side up. For a curved television, Spacers
(M-G) may be required.
M
P
S-F
T-C
S-F
To attach the TV to the stand, loosen the nut at the top of the VESA assembly, then slide the TV with
VESA assembly into the slot on top of the mounting plate on Center Pole (C). Place M6 Flange Nut
(S-F) onto bottom thread of VESA assembly and tighten both nuts using Wrench (T-C).
T-C

7
STEP 7
Remove clear protective film from both
the Shelf Clamp Plate (H) and Mounting
Bracket (I). Partially insert M6x60mm
Socket Head Bolts (S-H) into the shelf using
the 5mm Allen Wrench (T-B) as shown.
NOTE: Do not fully tighten screws at this
time.
STEP 8
Hold the Shelf (H) to the Pole (C). Place the
Mounting Bracket (I) over the screw heads, then
tighten with the 5mm Allen Wrench (T-B).
Adjust as desired.
H
I
S-H
T-B
I
C
T-B
H

LAST UPDATED: 04/03/2023
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303