Vivo STAND-V002M User manual

Dual Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v002m
SKU: STAND-V002M
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
A (x1)
Arm
B(x2)
VESA Bracket
C(x4)
Cable Clip
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x1)
Clamp
E(x1)
Pole Cover
F (x1)
Pole
G (x1)
Cable Clip
I (x5)
Pad
M-A (x8)
M4x12
M-B (x8)
M5x12
J (x1)
M10x20
K (x1)
Support Plate
M-C (x8)
D5 Washer
H (x1)
Grommet Base
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
L (x4)
Bushing
N (x4)
D8 Washer
O(x2)
M8 Nut
M (x2)
M8x60
P (x1)
5mm Allen
Wrench
Q (x1)
6mm Allen
Wrench
R (x1)
Wrench

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
OPTION A: Clamp Installation
Stick rubber pads (I) to the underside of clamp (D). Attach pole (F) to clamp (D) using M10x20 bolt (J).
Tighten using 6mm Allen wrench (Q). Attach clamp (D) to desktop.
Install pole cover (E) to pole (F).
17.6 lbs
(8 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER ARM
STEP 2

4
STEP 2 (Continued)
OPTION B: Grommet Base Installation
For grommet hole mounting, remove screw in top of clamp hand bolt (D). Stick rubber
pads (I) to bottom of grommet base (H). Secure pole (F) with grommet base to desk
using previously removed clamp bolt with support plate (I). If needed, drill hole in desk
with a 3/8” (10mm) drill bit.
STEP 3
Place bushings (L) into holes at ends of arms (A). Place side
VESA brackets (B) onto arms with M8x60 bolts and two D8
washers (N). Secure with two D8 washers (N) and M8 nuts
(O), and tighten with 5mm Allen wrench (P) and wrench (R).
Do not overtighten.

5
STEP 4
Attach cable clips (C) to arms (A) as shown.
STEP 5
Slide cable clip (G) and arm (A) onto pole (F) and tighten using 5mm Allen wrench (P).

6
STEP 6
STEP 7
Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of monitors, mak-
ing sure to leave 3mm of threads exposed. Align bolts (M-A, M-B) in VESA plates. Secure
using two more bolts (M-A or M-B) and washers (M-C) in the bottom two holes. Tighten all
eight bolts using phillips screwdriver.
Adjust tilt support with 6mm Allen wrench (Q).

7
STEP 8
Store Allen wrenches (P, Q) in cable clip (G) for future use.
STEP 9
Adjust alignment of monitors by turning bolt on top of each bracket with 5mm Allen wrench (P) as
shown.

LAST UPDATED: 06/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303