Vivo DESK-V101EC User manual

Black Electric Premium Single Column Desk Leg
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v101ec
SKU: DESK-V101EC
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
WARNING!
A (x1)
Support Bar
B(x1)
Liing Column
C(x1)
Base
S-A (x6)
Hex Flange
Bolts
S-B x4)
Hex Flange
Bolts
S-C (x8)
Philips Head
Screw + 1 Spacer
S-D (x3)
Cable Clip
H(x1)
Control Panel
D (x4)
Foot
E (x1)
Adapter
F (x2)
Cable Clip
G (x1)
Power Cable
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
S-E (x6)
Anti-Vibration
Pad
S-F (x1)
Allen
Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
TOOLS NEEDED
110lbs
(49.90kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Press anti-vibration pads (S-E) into top of support bar
(A). Insert liing column (B) into underside of support
bar as shown, making sure the motor cable is placed
through the slot in front. Secure the liing column using
short hex flange bolts (S-A) and tighten with the Allen
wrench (S-F).
Phillips
Screwdriver
STEP 2
Assemble the base (C) to the underside of the
liing column using long hex flange bolts (S-B)
and tighten with the Allen wrench (S-F).
Level
B
A
S-A
S-E
S-F
S-B
C
S-F

4
STEP 3
Attach the control panel (H) to the le-front or right-front of the desktop using x2 Phillips head screws
with spacers (S-C).
STEP 5
Screw the feet (D) into the base.
STEP 4
Place the desktop upside down on a flat
surface and position the leg/base assembly
upside down on the desktop. Secure the
assembly using x6 Phillips head screws with
spacers (S-C), and tighten with a Phillips
screwdriver.
D
S-C
Desktop (Not Included)
H
S-C

5
STEP 6
Route motor cables through slots and connect to the control panel (H).
STEP 8
Install the power cable (G) to the socket in the adapter, then route through the cable hole in the base.
STEP 7
Place the adapter (E) into the support bar as shown. Connect the
control panel cable to the adapter.
E
G

6
STEP 9
Check desk level using a bubble level, and turn feet to make corrections.
STEP 10
Attach the cable management clips (F) to
the liing column to hold the power cable in
place. Ensure the power cable has enough
slack between the desktop and the clips
for proper movement of the desk. Peel the
backing from the cable clip (S-D) and stick
to underside of desktop between the control
panel and adapter to manage cables.
F
S-D

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk weight limit. Keep area of vertical motion free of
obstacles.
Keep weight on desk balanced for
correct operation and longer life of
components.
Leave enough slack in cables to
allow for full range of vertical
motion.

LAST UPDATED: 03/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303