Vivo STAND-V001HG User manual

Single Monitor Desk Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v001hg
SKU: STAND-V001HG
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
a (x1)
Pole
b(x1)
Glass Base
c(x1)
Monitor Arm
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
d(x1)
VESA Plate
e(x1)
Decorative Cover
f (x3)
M6x10
g(x3)
Connecting Bolt
h (x3)
M8 Washer
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
i (x4)
Rubber Feet
j (x1)
So Pad
k (x1)
Wire Clip
m (x4)
M4x12
n (x4)
M4x30
l (x1)
M4x6
o (x4)
M4 Spacer
p (x1)
Allen Key

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
22lbs
(9.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
Weighted Base Installation
Attach Rubber Feet (i) to the underside of the Glass Base (b). See Figure 1. Attach So Pad (j) to the
Pole (a). See Figure 2. Use a screwdriver to poke holes for screws through the pad. Install Pole to Glass
Base using M6x10 Bolts (f), Connecting Bolts (g) and M8 Washers (h), and tighten with medium Allen
Key (p) and screwdriver. Slide Decorative Cover (e) over the Pole. See Figure 3.
Figure 1 Figure 2
m
n
b
Figure 3
b
g
h
f
e
a
Drill
i
j
g
p

4
STEP 2
Install Monitor Arm (c) to the Pole (a). Fasten the bolt
with supplied Allen Key (p). Attach the Wire Clip (k) to
the Pole (a).
STEP 3
OPTION A: Flat Back Monitor
For monitor with flat back, attach VESA plate (d) to monitor using thumb screws (m).
c
o
u
q
p
k
m

5
STEP 3 (Continued)
OPTION B: Curved Back Monitor
For monitor with curved back, attach VESA plate (d) to monitor using M4x30 bolts (n) with spacers
(o).
s
r
o
n

6
STEP 4
Slide the monitor onto the head of Monitor Arm (c) as shown in the diagram. Secure the VESA Plate (d)
using M4x6 Bolt (l). Make sure the bolt is installed before you rotate the monitor.
p
l

7
STEP 5
Tighten the grub screw in the Monitor Arm (c) using the small Allen Key (p) to fix the tilting angle.
Manage the cables and store tools using the Wire Clip (k).
grub
screw

LAST UPDATED: 06/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303