Vivo STAND-V001F User manual

Singl Monito Stand
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Modl STAN V001F
Tool Rquid
phillips screwdriver
Packag Contnt
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
- -http vivo u.com poduct tand v001f
A (x1)
Adapter Bracket
B (x1)
VESA Plate
C (x1)
Pole
D (x1)
Base
E (x1)
M10x20 Screw
F (x2)
M x20 Screw
G (x1)
3mm Allen Key
H (x1)
4mm Allen Key
M-A (x4)
M4x14 Screw
M-B (x4)
M x14 Screw

Stp 2
Slide Adapter Bracket (A) to desired position and tighten the bracket
using the 4mm Allen Wrench (H).
Ambl' Stp
2
Stp 1
Attach the Pole (C) to the Base (D) using the M10x20 Screw (E).

Stp 4
Carefully lift monitor and hook the VESA Plate (B) onto the mounted
head. Insert the M x20 Screws (F) into the mounting holes. Tighten
screws using 4mm Allen Wrench (H).
B
Stp 3
Screw the VESA Plate (B) onto the monitor using either M4x14
Screws (M-A), or M x14 Screws (M-B). NOTE: Screw size used will be
determined by design of the monitor.
B
3

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Saft' Waning
Contact u at
Last updated: 0 /17/18
Stp 5
If necessary, make adjustments to the Ball Joint Mechanism to reach
desired position or tilt using 3 mm Allen Wrench (G).
4