Vivo STAND-V102SF User manual

Dual Monitor Desk Stand with Riser
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v102sf
SKU: STAND-V102SF
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Pole
C(x2)
VESA Plate
D(x2)
VESA Bracket
M-A (x8)
M4x12
M-D (x8)
M5x16
P(x1)
6mm Allen
Key
K (x2)
Knob
M (x2)
M6x16
N (x8)
M6x14
O (x1)
4mm Allen
Key
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
M-F (x8)
Spacer
M-E (x8)
D5 Washer
E(x1)
Plaform
F(x4)
Leg
G (x1)
Base
H(x1)
Base Cover
I (x1)
M8x40
J (x1)
Support
Plate
M-C (x8)
M5x12
M-B (x8)
M4x16
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
B(x1)
Arm
L (x2)
M3x8
NOTE: SOME HARDWARE MAY NOT BE USED

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
15.4lbs
(6.99kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
Install legs (F) to underside of platform (E) using M6x14 bolts (N).
STEP 2
Slide base cover (H) up onto pole (A).
Install base (G) to pole using M6x16 bolts
(M) and tighten with 4mm Allen key (O).
Slide base cover down onto base.
PER SCREEN
F
E
N
A
H
G
M
O

4
STEP 3
Attach pole assembly to platform assembly using M8x45 bolt (I) and support plate (J), and
tighten with 6mm Allen key (P) while making sure base is straight on platform. The cell
phone support lip on the base cover should be facing towards the front.
STEP 4
Slide arm (B) down onto pole to desired height and tighten with 6mm Allen key (N).
I
J
P
B
1
P
2

5
STEP 5
STEP 6
OPTION A: Flat Back Monitor
Attach VESA plates (B) to the monitors using bolts (M-A, M-C) with D5 washers (M-E).
OPTION B: Curved Back Monitor
Attach VESA plates (B) to the monitors using bolts (M-B, M-D) with D5 washers (M-E)
and spacers (M-F).
M-A
M-C
M-E
TV
TV
TV
TV
TV
TV
M-B
M-D
M-E
M-F
1
2
C
C
Remove screw from end of each arm. Slide VESA brackets (D) onto arms, then reinstall
screws.

6
STEP 7
Slide VESA plates with monitors onto heads of VESA brackets. Secure using the
knobs (K) with M3x8 bolts (L). Slide monitors together to eliminate center gap and
tighten VESA brackets to arms using 4mm Allen key (O).
STEP 8
If needed, adjust tilt joint support using 6mm Allen key (N).
L
K
Note : When attaching the
monito r screens , pleas e hol d
the othe r end of the monito r
crossbar for balance.
1
2
P
NOTE: When attaching the monitor
screens, please hold the other end
of the monitor crossbar for balance.

7
P
O
STEP 9
Use cable clip on pole to organize cables. Store Allen keys in
cable clip when not in use.
STEP 10
Adjust monitor to desired viewing angle. Turn knobs (K) using 6mm Allen wrench (P) to
adjust monitor level if needed. Smartphone may be placed in holder on base cover.
Warning: Please don't
push the monitor arm to
more than 15 degrees.
Or else, it will cause the
monitor to tip over.
15°
15°
15°
15°
+45°
-45°
±20°
±180°
P
Warning: Do not push the
monitors back more than
15 degrees. Otherwise,
the stand may tip over
and cause damage.

LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303