Vivo STAND-V002H User manual

Dual Vertical Monitor Desk Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v002h
SKU: STAND-V002H
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
A (x2)
Adapter Bracket
Assembly
B(x2)
VESA Plate
C(x1)
Pole
NOTE: SOME HARDWARE INCLUDED MAY BE USED
D(x1)
Base
E(x1)
M10x20
F (x4)
M5x20
G (x1)
3mm Allen Key
H (x1)
4mm Allen Key
M-A (x8)
M4x14
M-B (x8)
M5x14
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
33 lbs
(15 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER ARM

3
ASSEMBLY STEPS
STEP 1
Attach the pole (C) to the base (D) using the screw (E). Slide the adapter bracket assemblies (A) to
desired positions on the pole. Tighten the assemblies firmly using 4mm Allen key (H). Re-attach the
plastic cover.
C
E
D
H
A

4
STEP 2
Screw the VESA plate (B) onto the display. Tighten all screws (M-A) or (M-B), but do not over-tighten.
M-A/M- B

5
STEP 3
Carefully li your display and hook the VESA plate (B) onto the adapter bracket assembly. Repeat for
second display.

6
STEP 3 (Continued)
Insert two screws (F) into mounting holes for each adapter bracket.
Tighten all screws using 4mm Allen key (H).
F
H

7
STEP 4
Depending on the weight of the display, it may be necessary to make adjustments to the Ball Joint
Mechanism. Adjust to the desired position or tilt.
+30°
-30°
+30°
-30°
60°
60°
G

LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303