
AW-FCT-050A-250
4 AT/AF Cameras
RG6 100m~1.2km
AP-FEX-0105-T
AP-FEX-0105-T
AP-FEX-0150-T
AP-FEX-0150-T
AW-FCT-050A-250
8 AF Cameras
RG6 100m~1.2km
AP-FEX-0200-T
AP-FEX-0250-T
AP-FEX-0250-T
AP-FEX-0200-T
. . . . . . . . . . . .
Coax
Ethernet
Length of coaxial cable AP-FEX-0105-T AP-FEX-0200-T AP-FEX-0150-T AP-FEX-0250-T
100m - 20W per port - 20W per port
300m 26.4W 12W per port 25.2W 11.5W per port
500m 17.48W 8W per port 17.64W 8W per port
800m 12.63W Data only (100Mbps) 11.76W Data only (100Mbps)
1000m 8.84W Data only (100Mbps) 9.66W Data only (100Mbps)
1200m 8.48W Data only (100Mbps) 7.56W Data only (100Mbps)
1200~2400m Data only (100Mbps) Data only (100Mbps) Data only (100Mbps) Data only (100Mbps)
1. Install the EPoC RX switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and
dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5e or CAT6 UTP/STP cables and RG6 coaxial cables.
4. Please avoid using low quality cables, which will seriously limit the cabling distance and power delivery. 5. AC input
(100~240V/AC, 50~60Hz), for a max. consumption of 250W.
AW-FCT-050A-250 4 Ports Unmanaged EPoC Switch
Model Power Source Description
AW-FCT-050A-250 100~240VAC and
56V DC inuput
EPoC RX switch, 4x BNC, 1x GbE RJ45, 100~240V AC input, -0ºC~50ºC
IMPORTANT:
INTRODUCTION
CONNECTION
PACKAGE CONTENTS
Quick Installation Guide
Grounding screw for 56v DC input
56v DC input
* 1x EPoC RX switch * 1x Quick Installation Guide
* 2x rack mount ears * 1x power cord (type by the shipped-to area)
Distance/Power Chart
Rev.: 1.1