Vivotek AW-GEH-043A-120 User manual

48~56VDC
Input
100~240VAC
Power Input
GbE RJ45
PoE Ports GbE SFP Ports
1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 5e UTP/STP cables.
4. AC input (100~240V/AC, 50~60HZ).
5. IP67 rated housing.
6. Although housing is IP67 rating, this is not suitable for water jets.
IMPORTANT:
LED DEFINITIONS
CONNECTION
* 1x PoE switch * 1x Quick Installation Guide
* 1x T25 L-wrench
PACKAGE CONTENTS
Power
PW1/PW2
Green ON Power is on and normal.
SFP port
Green
Green ON Fibre is attached.
Green Flashing Data is being transmitted/received.
LAN ports
Green
Green ON TX link is detected.
Green Blinking Data is being transmitted/received.
PoE ports
Amber
Amber ON PSE is activated and PD is detected.
Amber O󰀨 PoE is o󰀨.
AW-GEH-043A-120
Quick Installation Guide
Outdoor 95W PoH/PoE Switch
Link/Act LED PoE LED
8mm
AC Power Cable
AC Power Cable Specications
Wire Size 10~18AWG
Wire Strip Length 8mm
1.5m
The cabinet must be grounded using a ground wire between the ground screw and earth ground.
IMPORTANT:
P/N: 900063200G

VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T:[phone]|F:[phone]|E:[email protected]
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T: 408-773-8686|F: 408-773-8298|E: [email protected]
VIVOTEK Europe
Zandsteen 15, 2132 MZ Hoofddorp Delta Electronics
T: [phone] E: [email protected]
All specications are subject to change without noice.
Copyright © 2020 VIVOTEK INC. All rights reserved.
Use the included M10 hex socket screws to secure the power box to a pole-mount or corner mount bracket.
3/4” conduit
AM-314
AM-315
AM-414
M10
Outdoor PoE switch:
The mounting hole denition is illustrated below. The same mounting hole pattern apply to all pole-mount and corner-
mount brackets.
INSTALLATION