Voda Plumbingware Olympia VOP21BG User manual

9 421027 597327
Olympia Wall Mounted Basin Mixer
Brushed Gunmetal
VOP21BG
Voda Plumbingware Limited | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
Congratulations on your purchase of this high quality product from Voda Plumbingware.
Please read the following before installation and retain (along with your receipt) for future reference.
TECHNICAL SPECIFICATIONS
Suitable for All Pressures
Minimum Pressure = 35kPa
Maximum operating Pressure = 500kPa
Maximum operating Temperature = 65 deg. Celsius
For domestic use only.
CONFIGURATION
Mains Pressure systems Prior to installation, change the aerator to the Mains Pressure one supplied in the box.
Do not attach the flat flow restrictor.
Unequal Low systems Attach the flat flow restrictor (with the o-ring facing out) to the cold inlet.
Equal Low systems Install as supplied. Do not attach the flat flow restrictor.
INSTALLATION
For pressures exceeding 500kPa, install a pressure limiting valve. Failure to do so may void the warranty.
• Before commencing installation turn o the water supply.
• Flush all water lines to remove any foreign materials (so it does not interfere with the flow regulated aerator or
damage the cartridge.
• Make sure that the body recess including wall lining thickness does not exceed 41.5mm to the body centre.
• Note the protrusions at the back of the body to ensure a perpendicular mounting, once screwed into place.
• Install, making sure the spout is on the le. The spout fitment is the final anchor point for the body set.
• Turn on mains supply.
• Check for leaks.
Plumbers Note: Do not pressure test this mixer under static pressure.

WARRANTY
Please refer to our website for warranty information: www.vodaplumbingware.co.nz/warranty
In the unlikely event that this product fails during its warranty period, phone our Customer Service team
immediately on 0508 367 366 – as unauthorised removal of the product may void the warranty.
CARE AND MAINTENANCE
When cleaning this product (including chrome, stainless steel, coloured or any other surface coating) you must not
use any type of astringent, abrasive or citric cleaners.
We recommend using only a so, damp cloth and on occasion a mild soap solution. Try to avoid excessive
scrubbing as this could cause damage and void your warranty.
ATTACH PROOF OF PURCHASE HERE
Voda Plumbingware Limited | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz