Voda Plumbingware Proline VPLN600 User manual

9421027 594890
Voda Plumbingware (NZ) Ltd | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
Mounting
Washers
125mm
Proline Laundry Combination Taps
VPLN600
Congratulations on your purchase of this high quality product from Voda Plumbingware.
Please read the following before installation and retain (along with your receipt) for future reference.
TECHNICAL SPECIFICATIONS
Suitable for All Pressures
Minimum Pressure = 17kPa
Maximum operating Pressure = 500kPa
Maximum operating Temperature = 65 deg. Celsius
For domestic use only.
CONFIGURATION
Mains Pressure systems Install as supplied.
Unequal Low systems Install as supplied.
Equal Low systems Install as supplied.
INSTALLATION
For pressures exceeding 500kPa, install a pressure reducing valve. Failure to do so will void the warranty.
NOTE: In order to remove handles, the chrome disc needs to be prized out and handle retaining screw undone.
• Before commencing installation, turn o the water supply.
• Cut 15mm screwed tube to allow for a minimum 15mm wall protrusion and fit hot and cold tub taps. NB: It is
essential to apply either Teflon sealing tape or graphite & hemp around the screwed tube prior to installation.
• When attaching the washing machine taps, ensure that the mounting washer is inserted between the coupling
nut and wwashing machine tap inlet spigot. NB: Do not Over-tighten nut. Do not rotate washing machine tap,
once mounting nut tightened.
• Turn on the water supply. NB: Ensure the washing machine valves are o if not connected to the appliance.
• Check for leaks.

Voda Plumbingware (NZ) Ltd | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
ATTACH PROOF OF PURCHASE HERE
WARRANTY
Please refer to our website for warranty information: www.vodaplumbingware.co.nz/warranty
In the unlikely event that this product fails during its warranty period, phone our Customer Service team
immediately on 0508 367 366 – as unauthorised removal of the product may void the warranty.
CARE AND MAINTENANCE
When cleaning your Voda product (including chrome, stainless steel, coloured or any other surface coating) you
must not use any type of astringent, abrasive or citric cleaners.
We recommend using only a so, damp cloth and on occasion a mild soap solution. Try to avoid excessive
scrubbing as this could cause damage and void your warranty.