volkano Motion Series User manual

Motion Series
INSTRUCTIONS
PLEASE READ AND RETAIN THESE
INSTRUCTIONS FOR FUTURE REFERENCE
BLUETOOTH
ACTIVE EARPHONES
WITH COMFORT WINGS

Features
• Bluetooth
• Walk and talk
• Comfort fit wings
Specifications
Bluetooth version : 4.2
Support profiles : A2DP, HFP and AVRCP
Driver size : Ø10mm
Frequency response : 20Hz – 20 kHz
Impedance : 32Ω
Sensitivity : 110 dB
Playtime : 3 hours
Charge time : 2 hours
Battery capacity : 70mAh
What’s in the box
• Volkano Motion Bluetooth Earphones
• USB to micro USB charging cable
• Instruction manual
• Silicon comfort wings

Identifying parts on device
1. Volume up/next track selection
2. Volume down/previous track selection
3. Multi-function button: On/Off, Play/Pause,
Call answering/ending
4. LED light indicator
5. DC 5V, Micro USB charging slot
6. Microphone (at the back of the remote unit)
1
2
4
3
FRONT SIDE BACK
5
6

Charging
Please ensure that the battery is fully charged before
using the device for the first time.
• Connect the provided micro USB charge cable to the
DC 5V charging slot on the earphones, connect the
other end of the USB to a wall charger or an available
USB port on a compatible device.
• The red LED indicator light will display in a solid light.
• When the earphones are fully charged, the LED
indicator light will turn off.
• A voice reminder will notify you when the battery
is low.
Powering up
• To switch on the device, press and hold the
multifunction button for about 3 seconds until the
blue and red LED lights turn on and start flashing.
• To switch off the device, press and hold the
multifunction button for about 4 seconds until the
red LED light turns on then off again.

Bluetooth pairing and playing music
• Ensure that the earphones are off before pairing them
for the first time.
• Press and hold the multifunction button for about
3 seconds until the blue and red LED lights turn on
and start flashing.
• This means the earphones are now ready to pair with
your Bluetooth device.
• Ensure that your device’s Bluetooth is on. Search for
the device “Volkano Motion”. Confirm pairing by
selecting the device from the list.
• If prompted for a password, enter “0000” on
your device.
• When successfully paired, the blue LED light will
flash twice every 4 seconds.
• The device is now ready to make/receive calls and
playback music.
• To play the next or previous track, press the volume
up/next track selection or volume down/previous
track selection.
• To adjust the volume, press and hold the volume
up/next track selection or volume down/previous
track selection accordingly.
• To play or stop the music, press the multifunction
button.

Answering calls
Answering a call:
To answer an incoming call, press the multifunction
button once. The earphones will answer the call.
Rejecting a call:
To reject an incoming call, long press the multifunction
button, or use your mobile phone to reject the call.
Hang up a call:
To end a call, press the multifunction button once or use
your mobile phone to end the call.
Redial the last dialed call:
While in standby mode, double click the multifunction
button, the earphones will redial the last number dialed.
Do not dispose of electrical appliances
as unsorted municipal waste, use
separate collection facilities. Contact
your local government for information
regarding the collection systems
available. If electrical appliances are disposed of in
landfills or dumps, hazardous substances can leak into
the groundwater and get into the food chain, damaging
your health and well being.
Environmentally friendly disposal