volkano Asista E01 Series User manual

INSTRUCTION MANUAL
Please read and retain these instructions for future reference.
VK-1103-E01-BK
Asista E01 Serie s
BLUETOOTH EARPHONES
®
WITH VOICE ASSISTANT
H
A
R
D
C
A
R
R
Y
C
A
S
E

• Bluetooth®:
Version: 4.2
Chipset: BK
Profiles: A2DP, HFP, HSP, AVRCP
Range: 10 m
• Frequency Response: 20 Hz – 20 kHz
• Driver: 10 mm
• Impedance: 16 Ω
• Charge Input: 5 V DC, 1 A
• Sensitivity: 98 dB
• Battery Capacity: 80 mAh
• Battery Type: Lithium Polymer
• Playback Time: 4 – 6 Hours
• Charging Time: 2 Hours
• VolkanoX - Asista - E01 - Bluetooth®Earphones with Voice Assistant
• USB Charging Cable
• 3 x Earbud Cap Sizes
• Cable Length Adjuster
• Hard Carry Case
• Instruction Manual
• Hands-Free Calling
• Volume Controls
• Bluetooth®
• Compatible with Siri and Google Assistant
• Up to 6 Hours Playtime
• Metal Alloy Finish
• Magnetic Earbuds
PACKAGE CONTENTS
HIGHLIGHTS
SPECIFICATIONS
2

INSTRUCTIONS FOR USE:
IDENTIFYING PARTS
CHARGING THE EARPHONES
SWITCHING ON THE EARPHONES
Connect the USB A end of the Charging Cable to a USB Charging Port and insert the
Micro USB end to the port on the Asista earphones. Make sure it is properly connected.
The red indicator light will be lit while the earphones are charging and will turn off
when the earphones are ready for use.
To turn the earphones on, hold the Multifunction Button for approximately
three seconds. The earphones will prompt with three beeps and the LED will start
flashing blue and red. To turn the earphones off, hold the Multifunction Button for
approximately three seconds.
3
1. Next Track / Volume Up
2. Multifunction Button
3. Previous Track / Volume Down
4. LED Indicator
5. Voice Assistant Button
6. Micro USB Charging Port

PAIRING WITH BLUETOOTH
®
DEVICES
Your earphones must be paired to a Bluetooth®device before it can be used. It is
only necessary to pair your earphones once with each device. Please switch on your
earphone(s) before pairing them to your device.
1. Open the Bluetooth®Menu on the device you wish to pair (see “Locating the
Bluetooth®Menu” for more details). Some devices require you to select “Search for
Devices” or “Add New Device” in order to create a Bluetooth®pairing.
2. Wait until you see “Asista E01” on your device screen.
3. Select “Asista E01” on your device and follow any further prompts to pair. Once
pairing is complete and a connection is established, the earphones will sound with a
short beep to indicate a successful connection and the LED indicator will flash at a
slower rate.
iPhone, iPad, and iPod Touch:
a) On your device, go to Settings.
b) Select Bluetooth®. If Bluetooth®is not on, turn it on.
c) The iPhone / iPad / iPod will automatically search for new devices.
Android™ Phones and Tablets:
a) On your device, go to the Settings Menu.
b) Select Bluetooth®(on older Android devices Bluetooth®is found in the Wireless and
Networks Menu). If Bluetooth®is not on, turn it on.
c) Select “Search for Devices” if your phone or tablet does not automatically search for
new devices.
Once the earphones are turned on, they will automatically connect with the last paired
Bluetooth®device that is on and within range. If the earphones do not connect
automatically, open the Bluetooth®Menu on your device and select “Asista E01” from
the Bluetooth®device list.
LOCATING THE BLUETOOTH®MENU
CONNECTING WITH PAIRED DEVICES
4

5
1. Volume Controls
Function Operation Notes
Increase Volume Short press the Next Track
/ Volume Up Button When the volume reaches
the minimum or maximum
level, the earphones will
produce a short tone.
Decrease Volume Short press the Previous
Track / Volume Down Button
2. Audio Controls
Function Operation
Play or Pause Track Short press the Multifunction Button
Next Track Long press the Next Track / Volume Up Button
Previous Track Long press the Previous Track / Volume Down Button
CONTROLS
3. Controlling Phone Calls
Function Operation
Incoming Call
Answer Call Short press the
Multifunction Button
Reject Call Press and Hold the
Multifunction Button for 2 seconds
Call in
Progress End Call Short press the Multifunction Button
Call In
Waiting
End Call & Answer
New Call
Short press the
Multifunction Button
Answer Call & Place
Active Call on Hold
Press and Hold the
Multifunction Button for 2 seconds
Call Switching Press and Hold the
Multifunction Button for 2 seconds

• The product should only be used with the parts provided by the manufacturer.
• Never use your Asista earphones near water or in areas where it can come
into contact with water. Never handle the Asista earphones if it has been dropped
in water or any other liquid. If the product comes into contact with water while still
plugged in, this is a safety hazard.
• Always make sure your hands are dry before touching the USB cable or power
connections.
• Do not operate the product with a damaged cable, or after it malfunctions, has been
dropped or damaged in any manner.
• The Asista earphones are intended for personal use only. Commercial use invalidates
the warranty and the supplier cannot be held responsible for injury or damage caused
when using the device for any other purpose than that which it was intended for.
• The Asista earphones are not intended for use by children or persons with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use
of the device by a person responsible for their safety. Extreme caution must be
exercised.
• Children should be supervised to ensure that they do not play with the Asista
earphones. Packaging must never be left within reach of children, since it
is potentially dangerous.
Press the Voice Assist Button to activate Google Assistant or SIRI and once
activated, ask your question or give your command. Your music will continue playing
after your question has been answered or command completed. Please refer to your
mobile phone’s instruction manual regarding setting up SIRI or Google Assistant.
SAFETY PRECAUTIONS
USING GOOGLE ASSISTANT / SIRI
6

1. My mobile phone cannot find any new Bluetooth® devices?
a. Ensure the device has entered the pairing mode.
b. Ensure the device is within an effective working range.
2. Bluetooth® device cannot pair up?
Ensure your mobile phone allows new connections and has not reached the
maximum number of allowed devices.
3. The device does not play music or answer calls when it is connected to a
Bluetooth® mobile phone.
a. Ensure your mobile phone supports A2DP and HSF (Hands-Free) profiles.
b. Ensure your mobile phone is within an effective working range.
4. When paired with my computer, Windows®asks for a new driver.
Can you supply this?
We recommend you find compatible drivers for your computer online.
5. Why can I not remotely control the Pause / Play / Previous / Next functions when
music is playing?
This feature needs the Bluetooth® device paired with the earphones to support
AVRCP (Audio / Video Remote Control Profile). Please ensure your device
supports this.
• Before Cleaning: Ensure that your VolkanoX Asista earphones are not charging before
cleaning or maintaining it.
• Cleaning: Wipe down the surface of your VolkanoX Asista earphones using a soft,
slightly damp cloth.
• Do not use any harsh or abrasive cleaning chemicals or materials on your VolkanoX
Asista earphones as doing so may damage or scratch the surface finish.
• Do not expose your VolkanoX Asista earphones to direct sunlight or high
temperatures for extended periods of time.
• Do not store in temperatures over 60 °C.
TROUBLESHOOTING
CLEANING AND CARING INSTRUCTIONS
7

8
ENVIRONMENTALLY FRIENDLY DISPOSAL
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by VolkanoX is under license. Other trademarks
and trade names are those of their respective owners.
All product and company names are trademarks™ or registered®trademarks of their
respective holders. Use of them does not imply any affiliation with or endorsement
by them.
The VolkanoX Asista earphones come with a standard 12-month limited warranty
against manufacturing defects and faults.
Should your VolkanoX Asista earphones be unboxed with any faulty parts, poor
finishing or visible damage, or fail to perform due to a manufacturing defect or poor
workmanship, please return it with your proof of purchase (till slip or invoice) to the
store of purchase for an exchange, or repair, depending on the store’s returns policy.
This warranty commences from the date of purchase.
Kindly retain your proof of purchase as well as the packaging for your warranty period.
NOTE:
The warranty does not apply to a product that:
a.) Has failed due to excessive wear and tear beyond what is considered to be
reasonable.
b.) Has been misused or neglected.
c.) Has been damaged accidentally or by acts of God including fire and flooding.
d.) Has been used or operated contrary to operating or maintenance instructions
outlined in this manual.
DISCLAIMER
WARRANTY
Do not dispose of electrical appliances as unsorted municipal waste,
use separate collection facilities. Contact your local government for
information regarding the collection systems available. If electrical
appliances are disposed of in landfills or dumps, hazardous substances
can leak into the groundwater and get into the food chain, damaging
your health and well-being.

9
The Store of Purchase / Seller cannot accept any returned products that have not been
returned in accordance with this warranty or which does not follow their own Returns
Policy. Please refer to the Store of Purchase / Sellers Returns Policy for details.
Should you require any further assistance or have any questions on your warranty,
please contact the store of purchase.
WARRANTY (CONTINUED)