Volvo SENSUS User manual

SENSUS NAVIGATION

Text and symbols on the map
The car's current position
Map scale
List of the itinerary's guidance points
Destination and time of arrival/remaining time to arrival, or current posi-
tion and distance to destination
List of the itinerary's points of interest (Point of Interest - POI) and traffic
information
Destination/final destination
Intermediate destination
Guidance point
Car on planned route
Traffic information
Minimises (expanded view) or maximises (full screen) map image
Calculates detour
Repeats current voice guidance
Voice guidance temporarily On/Off
Cancels guidance
Enter destination/intermediate destination
Point of interest (Point of Interest - POI)
Resets the map to follow the car
Changes map display between 2D and 3D
Compass + Changes between north and travel direction up
Itinerary and alternative route

SENSUS NAVIGATION
Sensus Navigation is a satellite based traffic information and route guid-
ance system.
Development work is constantly in progress to improve our product.
Modifications may mean that information, descriptions and illustrations in
this supplement differ from the equipment in the car. We reserve the
right to make modifications without prior notice.

2
INTRODUCTION
Quick guide to map navigation 6
Simple guidance to a destination 6
Displays and operating controls for
map navigation 7
Common operations during map nav-
igation 8
VOICE RECOGNITION
Voice recognition 14
Using voice recognition 14
Voice recognition and map navigation 15
Settings for voice recognition 16
SPECIFY A DESTINATION
General information about entering a
destination 20
Enter destination directly on the map 20
Specify destination with free text
searching 21
Specifying a destination with Latest/
Favourites/Library 22
Specify destination with point of
interest (Point of Interest - POI) 24
Specifying a destination with an address 25
Save the destination with "Send to Car" 26
TABLE OF CONTENTS

3
ITINERARY AND ROUTE
Itinerary and Alternative route 30
Guidance points in the Itinerary 31
Points of interest (Point of Interest -
POI) along the route 31
Traffic disruptions along the route 32
Information cards on the map 32
Select detour 33
TRAFFIC INFORMATION
Traffic information 36
Real Time Traffic Information (RTTI), 37
SETTINGS
Activating/deactivating map display
in the driver display 40
Sensus Navigation settings 40
Map settings 41
Route settings 43
Traffic settings 44
Activating/deactivating Real Time
Traffic Information (RTTI), 45
Guidance settings 45
Map information 46

4
MAP AND SYSTEM INFORMATION
Updating map data with MapCare 48
Updating map data with Internet-
connected car 49
Updating map data via PC and USB 50
Fault tracing for Sensus Navigation 52
License agreement for map navigation 54
Copyright for map navigation 56
ALPHABETICAL INDEX
Alphabetical Index 57

INTRODUCTION

INTRODUCTION
6
Quick guide to map navigation
The car's electrical system is activated automati-
cally when the driver's door is opened.
Activating navigation
Home button
Menu row Navigation
If the navigation system does not show a map on
the centre display - tap on the uppermost menu
row Navigation (2).
If the centre display does not show the
Navigation menu row - press the Home button
(1) and then on the Navigation menu row (2).
Then a map of the current area is shown with the
car symbolised by a blue triangle.
WARNING
Observe the following.
•Direct all your attention to the road and
make sure that all your concentration is
on driving.
•Follow applicable traffic legislation and
drive with good judgment.
•Due to weather conditions or time of year
affecting the road conditions, some rec-
ommendations may be less reliable.
Deactivating navigation
The navigation system cannot be switched off but
always works in the background - it is only
switched off when the driver locks and leaves the
car.
NOTE
The navigation system is also available when
the engine is switched off. When the battery
level gets too low the system switches off.
Related information
•Displays and operating controls for map navi-
gation (p. 7)
•Simple guidance to a destination (p. 6)
Simple guidance to a destination
Setting guidance to the desired destination with-
out having to first read the whole owner's man-
ual.
Selecting a destination on the map
1. Tap on the Navigation subview.
2. Tap to maximise the map image.
3. Find the desired position on the map.
4. Tap and hold on the position.
> An icon is created and a menu is shown.
5. Press Go here.
> Guidance starts.

INTRODUCTION
}}
7
Displays and operating controls for
map navigation
Sensus Navigation is presented and operated in
several different ways, e.g. via the driver display,
head-up display and voice commands.
Centre display
All operation of the navigation system can take
place in the centre display, e.g. map settings and
setting destinations.
If the map image is not shown in the centre dis-
play - tap on the home view's top menu row
Navigation.
The driver display
The map is only shown in the 12" driver display.
During driving the driver is guided by voice guid-
ance and instructions on the driver display. Map
display in the driver display can also be active
without a set destination.
The right-hand steering wheel keypad
and the driver display
The right-hand steering wheel buttons can be
used to manage some of the map navigation
functions, e.g. Take me home and Cancel
guidance. If a message is shown the driver dis-
play, it must first be acknowledged for the menu
to be shown.
Opening/closing the menu. The menu is
closed automatically after a period of inactiv-
ity or with certain options.
Browsing between menus.
Browsing between menu options.
Confirm or highlight an option.

||
INTRODUCTION
* Option/accessory.
8
Head-up display*
Map navigation on the windscreen.
The driver can also receive guidance and infor-
mation from the navigation system in the head-up
display on the bottom of the windscreen.
Display of navigation information can be switched
off and the position of the information field can
be adjusted.
Voice recognition
Many functions can also be controlled with voice
commands.
Press the steering wheel but-
ton, wait for the signal, then
say, for example, “Drive Home”.
Related information
•Specify destination with free text searching
(p. 21)
•Voice recognition and map navigation
(p. 15)
•Voice recognition (p. 14)
•Using voice recognition (p. 14)
•Settings for voice recognition (p. 16)
•Activating/deactivating map display in the
driver display (p. 40)
Common operations during map
navigation
Some common operations during map naviga-
tion are described below.
•Where am I?
•Find the car symbol on the map
•Driving direction or north up on the map
•2D or 3D display
•Zoom
•Scroll
•Switching heading display
•Return from a menu
Where am I?
What geographic position does the car have
now?
•Press the map's car symbol (blue triangle) -
the information is shown directly on the map.

INTRODUCTION
}}
9
Find the car symbol on the map
Press the crosshairs symbol.
After zooming in and out and scrolling around on
the map it can sometimes be hard to find your
way back to the car's position on the map. This is
the simplest way to find it:
•Press the crosshairs symbol - the map is
then reset and thereafter follows the car
symbol.
Driving direction or north up on the
map
Press the compass to change the car symbol’s move-
ment on the map.
The driver can choose between two ways to rep-
resent the car's movement in relation to the map:
•The map is always shown with north upwards
on the centre display - the car symbol moves
in its true compass direction on the map. If
the car symbol moves to the left on the map
then the car is driving westwards.
•The car symbol always points upwards on the
centre display - the map rotates under the
car symbol depending on how the car turns.
The compass symbol indicates the direction
of north (N) on the map, and the centre of
the compass shows the direction in which
the front of the car is pointing (in this case
NE = Northeast).
Compass symbols Compass direction
N North
NE NorthEast
E East
SE SouthEast
S South
SW SouthWest
W West
NW NorthWest
2D or 3D display
Press 2D/3D to change between 2D and 3D display.
In 3D display, the car’s heading is always
upwards on the centre display - the map rotates

||
INTRODUCTION
10
around the car symbol depending on how the car
turns.
The compass symbol indicates which direction
north is (N) on the map, and the centre of the
compass shows the direction in which the front
of the car is pointing.
The map scale is not shown in the 3D mode.
2D display is described under the previous head-
ing "Driving direction or north up on the map".
Zoom
Zoom in
Make the map bigger like this:
Double-tap the centre display
with one finger.
or
Touch the centre display with
two fingers close together, then
spread them apart.
Zoom out
Make the map smaller like this:
Tap once on the centre display
with two fingers spread apart.
or
Touch the centre display with
two fingers spread apart, then
draw them together.
Scroll
Place one finger on the map,
swipe in the desired direction,
and release.
The scroll function is only pos-
sible with the map in the maxi-
mum mode, not when it is mini-
mised.
Switching heading display
Press here to change the map heading.
Choose between the following displays as the
heading on the map:
•Specification of destination (Destination) and
arrival time (ETA) or remaining time to arrival
(RTA). To select ETA or RTA, see the sec-
tion "Route settings".
or
•Definition of the current position (Position)
and distance to the destination (Dist).
Change of heading is only possible with the map
in the maximum mode, not when it is minimised.

INTRODUCTION
11
Finding the way back to the map view
Home button
Menu row Navigation
If the driver is "a long way away" in another part
of the system and wishes to quickly return to the
map view, this method can be used:
1. Press the centre display's Home button (1).
2. If the centre display shows the home view
instead of the map view - tap on the upper-
most menu row Navigation (2).
Related information
•Activating/deactivating map display in the
driver display (p. 40)
•Sensus Navigation settings (p. 40)
•Route settings (p. 43)

VOICE RECOGNITION

VOICE RECOGNITION
* Option/accessory.
14
Voice recognition1
The voice recognition system allows the driver to
use voice recognition to control certain functions
of the media player, Bluetooth-connected phone,
the climate system and Volvo's navigation sys-
tem*.
Voice commands offer convenience and help the
driver to avoid being distracted, and instead con-
centrate on driving and focus attention on the
road and the traffic conditions.
WARNING
The driver always holds overall responsibility
for driving the vehicle in a safe manner and
complying with all applicable rules of the road.
Voice control system microphone
Voice recognition control takes place in dialogue
form with spoken commands from the user and
verbal response from the system. The voice rec-
ognition system uses the same microphone as
the Bluetooth handsfree system and the voice
recognition system's replies come via the car's
speakers. In some cases, a text message is also
shown in the driver display. Functions are con-
trolled from the right-hand steering wheel key-
pad. Settings are made via the centre display.
System updating
The voice recognition system is continuously
improved. Download updates for optimal perform-
ance, see support.volvocars.com.
Related information
•Using voice recognition (p. 14)
•Voice recognition and map navigation
(p. 15)
•Settings for voice recognition (p. 16)
Using voice recognition2
Basic instructions for using voice recognition
control.
Depress the steering wheel
button for voice recognition
to activate the system and
initiate a dialogue using voice
commands.
Remember the following during communication:
•For a command - speak after the tone in a
normal voice at normal speed.
•Do not speak while the system is replying
(the system cannot understand commands
during this time).
•Avoid background noise in the passenger
compartment by having the doors, windows
and sunroof closed.
Voice recognition can be deactivated as follows:
•by saying "Cancel".
•with a long press on the voice recognition
button on the steering wheel .
To speed up communication and skip the
prompts from the system, press the steering
wheel button for voice recognition when the
system voice is speaking and say the next com-
mand.
1Applies to certain markets.

VOICE RECOGNITION
}}
15
Example of voice recognition control
Press , say “Call [Forename] [Surname]
[number category]" - calls the selected contact
from the phone book if the contact has more
than one phone number (e.g. home, mobile,
work), e.g.:
Press , say "Call Robin Smith Mobile".
Commands/phrases
The following commands are always available for
use:
•"Repeat" - repeats the last voice instruction
in the ongoing dialogue.
•"Cancel" - discontinue the dialogue.
•"Help" - starts a help dialogue. The system
replies with the commands available in the
current situation, a prompt or an example.
Commands for specific functions are described in
the corresponding sections, e.g. Voice recogni-
tion control of the phone.
Digits
The number commands are stated differently
depending on the function to be controlled:
•Phone numbers and postcodes must be
spoken individually, number by number, e.g.
zero three one two two four four three
(03122443).
•House numbers can be spoken individually
or in groups, e.g. two two or twenty-two (22).
For English and Dutch, several groups can
be said in sequence, e.g. twenty-two twenty-
two (22 22). For English, double or triple can
be used, e.g. double zero (00). Numbers can
be given within the range 0-2300.
•Frequencies can be spoken as ninety eight
point eight (98.8), a hundred and four point
two or hundred four point two (104.2).
Related information
•Voice recognition (p. 14)
•Settings for voice recognition (p. 16)
Voice recognition and map
navigation3
Command for voice control of the navigation
system, e.g. set destination or pause guidance.
Tap on and say one of the following com-
mands:
•“Navigation” - Initiates a navigation dialogue
and shows examples of commands.
•"Take me home" - Guidance is given to the
Home position.
•"Go to [City]" - Specifies a city as a desti-
nation. Example "Drive to London".
•"Go to [Address]" - Specifies an address
as a destination. An address must contain
city and street. Example "Drive to 5 King
Street".
•"Add intersection" - Starts a dialogue
where two streets must be specified. The
intersection point of the specified streets
then becomes the destination.
•"Go to [Post code]" - Specifies a post
code as a destination. Example "Drive to 1 2
3 4 5".
•"Go to [contact]" - Specifies an address
from the phone book as a destination. Exam-
ple "Drive to Robyn Smith".
2Applies to certain markets.
3Applies to certain markets.

||
VOICE RECOGNITION
16
•"Search [POI category]" - Searches for
adjacent points of interest (POI) within a cer-
tain category (e.g. restaurants).4To have the
list sorted along the route - say "Along the
route" when the results list is shown.
•"Search [POI category] in [City]" -
Searches for points of interest (POI) within a
certain category and city. The results list is
sorted according to the city's centre point.
Example "Search for restaurant in London".
•"Search [POI name]". Example "Search
Hyde Park".
•"Change country/Change state5, 6" -
Changes the search area for navigation.
•"Show favourites" - Shows favourited posi-
tions in the driver display.
•"Clear itinerary" - Erases all the stored
intermediate destinations and final destina-
tion in an itinerary.
•"Repeat voice guidance" - Repeats the
last spoken guidance.
•"Turn off voice guidance" - Switches off
voice guidance.
•"Turn on voice guidance" - Starts the
switched-off voice guidance.
Related information
•Displays and operating controls for map navi-
gation (p. 7)
•Voice recognition (p. 14)
•Using voice recognition (p. 14)
•Settings for voice recognition (p. 16)
Settings for voice recognition7
Several settings for the voice recognition system
can be made.
1. Press Settings in top view.
2. Press System Voice Control and select
settings.
•Repeat Mode
•Gender
•Speech Rate
Audio settings
1. Press Settings in top view.
2. Press Sound System Volumes Voice
Control and select settings.
Change language
Voice recognition is not possible for all lan-
guages. Languages available for voice recogni-
tion are marked with an icon in the language list -
.
Changing the language also affects menu, mes-
sage and help texts.
1. Press Settings in top view.
2. Press System Language and select lan-
guage.
4The user has the option of calling the POI or specifying it as a destination.
5In European countries, “Country” is used instead of “State”.
6For Brazil and India, the search area is changed via the centre display.
7Applies to certain markets.

VOICE RECOGNITION
17
Related information
•Voice recognition (p. 14)
•Using voice recognition (p. 14)
•Voice recognition and map navigation (p. 15)