Figure 4- Under Carpet/Trim Figure 5- Along Door Sills Figure 6- Firewall
Figure 1- Under Seat Figure 2 SUV- Luggage Area Figure 3- Trunk Area
1. Battery Charge Indicator
This indicator provides information on the charge level of the internal
battery.
2. Battery Temperature Indicator
This indicator indicates when the battery temperature is outside the ideal
temperature range to perform a jump-start.
3. Go/Status Button
This button is used to check status of the POWV3.5 and to initiate jump
starting.
4. Status Indicator
This indicator provides information on the system status.
5. Positive Charge and Discharge Cable
This cable provides positive connection to the vehicle’s electrical system to
allow for charging of the internal battery and discharging for jump-starting
the vehicle.
6. Negative Charge and Discharge Cable
This cable provides negative connection to the vehicle’s electrical system to
allow for charging of the internal battery and discharging for jump-starting
the vehicle.
1.1. Battery Charge IndicatorBattery Charge Indicator
This indicator provides information on the charge level of the internal battery.This indicator provides information on the charge level of the internal battery.
1.1. Battery Temperature IndicatorBattery Temperature Indicator
This indicator indicates when the battery temperature is outside the ideal temperatureThis indicator indicates when the battery temperature is outside the ideal temperature
range to perform a jump-start.range to perform a jump-start.
1.1. Go/Status ButtonGo/Status Button
This button is used to check status of the POWV3.5 and to initiate jump starting.This button is used to check status of the POWV3.5 and to initiate jump starting.
1.1. Status IndicatorStatus Indicator
This indicator provides information on the system status.This indicator provides information on the system status.
1.1. Positive Charge and Discharge CablePositive Charge and Discharge Cable
This cable provides positive connection to the vehicle’s electrical system to allow forThis cable provides positive connection to the vehicle’s electrical system to allow for
charging of the internal battery and discharging for jump-starting the vehicle.charging of the internal battery and discharging for jump-starting the vehicle.
1.1. Negative Charge and Discharge CableNegative Charge and Discharge Cable
This cable provides negative connection to the vehicle’s electrical system to allow forThis cable provides negative connection to the vehicle’s electrical system to allow for
charging of the internal battery and discharging for jump-starting the vehicle.charging of the internal battery and discharging for jump-starting the vehicle.
POW3.5 Mounting Location
Because the product requires direct connection to the vehicle’s electrical system, it must be installed by a qualified professional installer. Installation of the POWV3.5
requires careful planning and preparation. The POWV3.5 should be installed under a seat or in a trunk in a location where the GO/Status button can be accessed, and
the indicator LEDs are visible. It should NOT be installed in the engine compartment or any other location where it would be exposed to extreme temperatures.
POW3.5 Cable Routing
Basic electrical wiring precautions should be taken when routing cables from the POWV3.5 to the Factory battery. When routing cables under carpet, along door sills,
and through fire walls, precaution should be taken to NOT crush, slice or damage cables. Routing of the power cable requires special attention. Unlike other long
power runs for electronics within a vehicle that are generally fused, the POWV3.5, once engaged, releases <525 Amps of current. Fuses and circuit breakers commonly
found for 12v applications do not allow for such high current bursts of power so special care when routing the power wire is required to prevent damage to the vehicle
because of electrical shorting of the power cable. All cable runs should be free from potential shorting, especially when routing through firewalls where wires should be
protected with wire loom and run through a factory or aftermarket gromet.
54
Controls and Indicators Diagram General Installation
