VQ Model GRUNAU BABY User manual

SPECIFICATIONS
Wingspan 2100mm
Length 1120mm
Radio 4 Channel / 4-5 Servos
TECHNISCHE DATEN
Spannweiter 2100mm
Lange 1120mm
Fernsteuerung 4 Kanal / 4-5 Servos
WARNING! This radio controlled model is NOT a toy. If modified or flown carelessly it could go out of controll and
cause serious human injury or property damage. Before flying your airplane, ensure the air field is spacious enough.
Always fly it outdoors in safe areas and seek professional advice if you are unexperienced.
ACHTUNG! Dieses ferngesteuerte Modell ist KEIN Spielzeug! Es ist für fortgeschrittene Modellflugpiloten bestimmt,
die ausreichende Erfahrung im Umgang mit derartigen Modellen besitzen Bei unsachgemäßer Verwendung kann
hoher Personen- und/oder Sachschaden entstehen. Fragen Sie in einem Modellbauverein in Ihrer Nähe um
professionelle Unterstützung, wenn Sie Hilfe im Bau und Betrieb benötigen. Der Zusammenbau dieses Modells ist
durch die vielen Abbildungen selbsterklärend und ist für fortgeschrittene, erfahrene Modellbauer bestimmt.
Instruction manual / Montageanleitung
Radio control model / Flugmodel
ALL BALSA, PLYWOOD CONSTRUCTION AND ALMOST READY TO FLY
ARF BY
GLIDER
GRUNAU BABY

.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
1.5mm
AB
!
CA
L/R
Assemble left and right
sides the same way.
X
Drill holes using the stated
size of drill
(in this case 1.5 mm Ø)
Use epoxy glue
Take particular care here Hatched-in areas:
remove covering
film carefully
Not included.
These parts must be
purchased separately
Check during assembly that these
parts move freely, without binding
Apply cyano glue
SILICON
EPOXY A
EPOXY B
CA
Epoxy Glue (30 minutes type)
Silicon Glue
Cyanoacrylate Glue
Sekundenkleber
Epoxy-Klebstoff (30min)
Minimum 4 channel radio
for airplane
Extension cord
REQUIRED FOR OPERATION (Purchase separately)
Minimum 4 Kanal
Fernsteuerung Servoverlangerungskabel
BENOTIGTE KOMPONENTEN (Nicht im Lieferumfang enthalten)
Brushless Motor
PICHLER BOOST 20
Brushless ESC
Brushless Regler
Battery / Flugakku LEMONRC 2200-11.1V
Silikonkleber
Tool Required/ Erfoderliches Werkzeug
The pre-covered film on ARF kit may wrinkle due to variations of temperature.
Store model in a cool and dry place for awile.
Then, staring with low heat, you may carefully use a hair dryer to smooth out wrinkels.
Die Bespannung des Modells kann durch Temeratureinflusse erschlaffen oder Falten
werfen z.b bei zu starker Sonnenenstrahlung oder Hitze.
Stellen Sie das Modell zunachst an einen kuhlen Platz fur eine bestimmte Zeit. Danach
konnen Sie versuchen die restlichen Falten vorstichtig mit einem Haartrockner zu behandeln.
!
CONVERSION TABLE
1.0mm = 3/64”
1.5mm = 1/16”
2.0mm = 5/64”
2.5mm = 3/32”
3.0mm = 1/8”
4.0mm = 5/32”
5.0mm = 13/64”
6.0mm = 15/64”
10mm = 13/32”
12mm = 15/32”
15mm = 19/32”
20mm = 51/64”
25mm = 1”
30mm = 1-3/16”
45mm = 1-51/64”
Klappluftschrauben 9x5
Best.Nr. C2591
Kunststoff-Spinner
Mini servo S1513
Best.Nr. C1085

Elevator control horn
BOTTOM - VIEW / Unteransicht
1- Horizontal Tail / Hohenruder
5 min. Epoxy
AB
AB
WARNING!: Securely glue together, if coming of
during flights, you lose control of your plane
which lead to accidents.
Fuhren Sie die Verkiebungen mit gro ter
Sorgfalt aus.
FUSELAGE - TOP-VIEW
Aufsicht
2- Vertical Tail / Seitenruder
5 min. Epoxy
FUSELAGE - TOP-VIEW
Aufsicht
3- Horizontal Tail / Hohenruder
WARNING!: Securely glue together, if coming of
during flights, you lose control of your plane
which lead to accidents.
Fuhren Sie die Verkiebungen mit gro ter
Sorgfalt aus.
Elev. / Rudd.
Plastic control horn
CA
AB
5 min. Epoxy
Cut away only the covering on the bottom
of the horizontal stabilizer
Bespannfolie an den
Klebestellen vorsichtig
entfernen.
Elev. / Rudd.
Plastic control horn
CA
Cut away only
the covering.

6x30mm dowel
AB
5 min. Epoxy
Included with the radio set
Aileron servo
hatch (ply 3mm)
4- Aileron servo / Hohenruder servo
BOTTOM - VIEW / Unteransicht
WING - BOTTOM
Seitenruder servo
Hohenruder servo
FUSELAGE - TOP-VIEW
Aufsicht
Linkage Stopper set
..............2
Gestängeanschluss
5- Servo
6- Wing Joiner / Flachenverbinder 6x30mm dowel
....4
CA
AB
5 min. Epoxy
Cut away only
the covering.

3x12mm screw
...........2
2.mm drill bit
1
2
Aluminum tube
Note: all holes on the surface
of the left and right wing are
pre- drilled at factory.
Carefully slide the left and center wing together
ensure that they are accurately aligned, Drilling
the 2mm hole through the aluminum tubes.
Do the same way with the right
wing.
Wooden block
7- Wing Joiner / Flachenverbinder
8- Wing Joiner / Flachenverbinder
9- Wing Joiner / Flachenverbinder

Aluminum tube
10- Motor mount / Motortrager Note: Brushless motor and motor mount not included.
11- Wing Joiner / Flachenverbinder
IN CASE OF BRUSHLESS MOTOR USING
12- Wing Joiner / Flachenverbinder

3x12mm screw
...........2
Carefully slide the left and center wing together
ensure that they are accurately aligned, Drilling
the 2mm hole through the aluminum tubes.
Do the same way with the right
wing.
13- Wing Joiner / Flachenverbinder
14- Cockpit
Magnetic cockpit
15 - Wing brace
3x12mm screw
3x12mm screw
3x12mm screw
...........4
Note: all holes on the fuselage and bottom of the
wing are pre-drilled at factory.

Wing center section
DO NOT try to fly an out-of-balance model !
16- Balance / Schwerpunkt
90 ~ 93mm
Note: If necessary, move the battery pack or add weight to either the tail
or nose until the correct balance is achieved.
1-23/64”(30 mm)
15/64”(6mm)
13/32”(10mm)
15/64”(6mm)
13/32”(10mm)
1-23/64”(30 mm)
17- Control Surface / Ruderausschlage
RUDDER / SEITENRUDER
AILERON / QUERRUDER
ELEVATOR / HOHENRUDER