Vuly Bed Swing User manual

MANUALBed Swing
Connect the Frame Tubes together.
Ensure that the bolt holes in all parts line up.
You have attached the Bed Swing
to your Swing Set.
CONGRATULATIONS!
2
STEP
1
STEP
Insert the bolts at the
end of the Ropes into
the holes to secure
the Frame Tubes
together.
Make sure that you
insert the locking nut
first, then attach the
cap nut.
3
STEP
4
STEP
VULY MINI:
VULY MAX:
Remove the first set of carabiners on both sides of the
Swing.
Insert the curved Frame Tubes through the holes at
the end of the Base Material.
Unlock the carabiners on your Swing, and hook them into
the lugs on the Swing Rail.
Ensure that both carabiners are facing the same direction
and have been firmly tightened.
Unlock the carabiners on your Swing, and hook them
into the lugs on the Swing Rail.
Ensure that both carabiners are facing the same
direction and have been firmly tightened.
Slide the straight Frame Tubes through the holes along
the side of the Base Material.
A.
A.
B.
B.

ATTENTION!
Safety information, installation and use instructions.
Read prior to installing and using the swings.
See VulyPlay.com/support for any updates to these instructions.
WARNING!
• Minimum user age – 6 years. Only for domestic and outdoor use.
• Maximum user weight per swing station – 80 kg (175 lb) [65 kg (132 lb) on Spin Swing].
• Maximum combined user weight per swing set section – 150 kg (330 lb).
• Adult assembly required. Adult supervision required at all times.
• Ensure that the Swing Set is secured with anchors or bolts before use.
Vuly Play
95 Ingleston Rd, Brisbane QLD 4154
AU: 1300 667 514
US: 1-800-467-1421
www.vulyplay.com
Disclaimer