Vuly Cubby Swing User manual

1
You must attach your Cubby Swing only in the configurations shown below – to a Medium or Large swing set or play set
configuration with capacity for two or three standard swings side by side.
You must not attach onto a Small swing set or play set (with capacity for only one standard swing).
ASSEMBLY MANUAL
Cubby Swing
WARNING!
Connect each
Tube until you have
created the full ring
base.
PRE-INSTALLATION
INSTALLATION
Remove a Locking Bolt from
the Rail Bracket and slip it
over a Joiner on the Swing
Rail.
Reinsert the Locking Bolt
and tighten the bolts firmly
– until you notice the rubber
beginning to squeeze – to
secure the Rail Bracket.
1
STEP 2 STEP

2
ASSEMBLY MANUAL
Cubby Swing
You have attached your Cubby Swing
to your Vuly 360 Pro.
CONGRATULATIONS!
Unlock the carabiner on your
Cubby Swing, and hook it into
the Rail Bracket.
Insert the completed ring into the base of your hanging Cubby
Swing material. Go around the ring and secure it to the material
inside with the attached Velcro straps.
3
STEP
4
STEP
5
STEP
Insert the Foam
Padding into the
Cubby Swing.
DISCLAIMER
ATTENTION!
Safety information, installation and use instructions.
Read prior to installing and using the swings.
See VulyPlay.com/support for any updates to
these instructions.
WARNING!
• Minimum user age – 6 years. Only for domestic and
outdoor use.
• Maximum user weight per swing station – 80 kg (175
lb) [65 kg (132 lb) on Spin Swing].
• Maximum combined user weight per swing set section
– 150 kg (330 lb).
• Adult assembly required. Adult supervision required at
all times.
• Ensure that the Swing Set is secured with anchors or
bolts before use.
ADULT SUPERVISION IS REQUIRED AT ALL TIMES WHILST EQUIPMENT IS IN USE.
VULY CARES ABOUT SAFETY.