Walker Edison BU56SBD3DR User manual

Insert wooden dowel (A) into parts (2,12) ,then secure cam bolt (B) into parts (1,19,25) with
Philips head screwdriver as per diagram.

Insert wooden dowel (A) into parts (3,6,7,9) ,then secure cam bolt (B) into parts (4,6,7,9) with
Philips head screwdriver as per diagram.

Pick up the slider (AA) and separate the slider arm and slider bracket for the following steps.
Extend the Slide .Runner all the way forward,press the plastic release lever of the slider bracket
and pull out the Slider bracket complete.

Using screw (Q) secure drawer slider (AA) to parts (17,18,23,24) with Philips head screwdriver
as per diagram.

Using screw (Q) secure drawer slider (AA) to parts (6,9) with Philips head screwdriver
as per diagram.

Using Cam lock(C) secure part (4) to part (3) ,part (7) to part (6) with Philips head screwdriver
as per diagram.

Attach part (2) to part (7),then using Cam lock(C) secure part (12) to part (6) with Philips head
screwdriver as per diagram.

Using Cam lock(C) secure parts (2,12) to part (9) ,parts (3,2) to part (3) with Philips head
screwdriver as per diagram.

Using screw (F) attach part (27) to part (13) with Hex Key (H) as per diagram.

Using screw (F) attach part (13) to parts (3,6,9) with hex key (H) as per diagram.

Using bolt (G) secure plastic wedge (S) into parts (14,15,16) with Hex key (H) as per diagram.

Using bolt (G) secure plastic wedge (S) into part(16) with Hex key (H) as per diagram.

Using bolt (G) secure plastic wedge (S) into part (13) with Hex key (H)as per diagram.

Using bolt (U) secure Pulley (T) into part (11) ,and using bolt (K) secure Handle (J) into
parts (11) with Philips head screwdriver as per diagram.

Pick up the door (11), and fit the pulley over the slider rails on part (2) as per diagram.