Walker Edison D60UBS30 User manual

Insert cam bolts (B) into side frames (1)(2). Use bolt (M) to secure velcro strap (N) into
side frame (2).
Insert wooden dowels (A) and bolts (B) into the table top (13).

Insert wooden dowels (A) into back panel (5) and drawer panels (9)(10)(11).
Insert the USB Interface (S) into side frame (2) and secure it with screw (L).

Use wrench (U) and bolts (D) to secure the L shape bracket (E) to the shelving
board (6)(7).
Use wrench (U), bolts (D) to secure the L shape bracket (E) to the shelving board (6)
and Side Frame (1)(3).

Use wrench (U), bolts (D) to secure the L shape bracket (E) to the shelving board (7)
and the Side Frame (1)(3).
Use wrench (U), bolts (D) to secure the L shape bracket (E) to the shelving board (6)
and Side Frame (2)(4).

Use wrench (U), bolts (D) to secure the L shape bracket (E) to the shelving board (7)
and the Side Frame (2)(4).
Use cam locks (C) to secure the Table Top (13) to the Side Frame (1).

Use cam locks (C) to secure the Table Top (13) to the Side Frame (2).
Use Cam Lock (C) to secure the Back Panel (5) to the Table Top (13).

Use bolts (D), wrench (U) to secure the Flat Bracket (F) to the Side Frame (3) and
Back Panel (5).
Use bolts (D), wrench (U) to secure the Flat Bracket (F) to the Side Frame (4) and
Back Panel (5).

Use bolts (J), wrench (U) to secure Side Frame (3) to the Table Top (13).
Use bolts (J), wrench (U) to secure Side Frame (4) to the Table Top (13).

Use stickers (V) to cover the Cam Locks.
Use screws (L) to secure the Hinge Lock (P) to the drawer side panel (10).
Use screws (L) to secure the Hinge Lock (Q) to the drawer side panel (11).

Using screws (K) assemble the bottom drawer panel (12) to the drawers panels
(9)(10)(11).
Use screws (L) to secure Hinge (R) to drawer front panel (8) and drawer bottom panel (12).
Use bolts (H) to assemble the drawer handle (G) to the drawer front panel (8).

Slide drawer (8) into the desk using tray arms as guides.