Walker Edison AF44JAMET User manual

P.1
Copyright
202
0b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Please visit our websitefor the most current instructions, assemblytips, report damage,
or request parts. www.walkeredison.com
Revised 11/05/2020 (I)
Walker Edison
TM
AssemblyInstructions
Item #: AF44JAMET

P.2
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
GeneralAssembly Guidelines
I.Ensure thatallpartsandhardware are available beforebeginning assembly.
II.Followeachstepcarefullytoensure theproper assembly of this product.
21
III.Twopeoplearerecommendedfor easeintheassembly of this product.
IV.Thethreemaintypesofhardwareusedtoassemble this product are: wood
dowels,screwsandbolts.
V.Theprovidedglueistosecurewooddowelsin place.Whenfirstinserting dowels ,
locatetheappropriatehole forthedowel,placeasmallamount of glue inthe hole
andinsertthedowel .Wipeawayexcessglue immediately.
Infutureassemblystepswhendowelsarenecessary toattachassembly parts
together,placeasmall amountofglue on theendof the dowelbeforeattaching
partstogether.Wipeawayexcessglueimmediately.
VI.APhillipsheadscrewdriverisrequiredfortheassemblyofthis product .
VII.Powertoolsshouldnotbeusedtoassemblethis product .

P.3
Parts List
1
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
2
2
3
4
4

P.4
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
HardwareList
The hardware quantities listed above are required for proper assembly.
Someextrahardware may also have been included.
Philipsheadscrewdriverrequiredforassembly
(notincluded)
Ø8x30mm WoodendowelA 4 pcs
Ø4x38mm FlatheadB 6 pcs
M4 Hexkey
C
1 pcD
E
F
G
Ø8x60mm Bolt 4 pcs
Ø5/16 Washer 4 pcs
Ø5/16 Nut 4 pcs
Ø5/16 Wrench
1pc
H
J
Ø6x15mm Bolt 4 pcs
K
Gluetube
1 pc
L
M
N
Ø4x12mm Screw
Ø4x25mm Screw
Plasticstrap
Nut 1 pc
1 pc
1 pc
1 pc

P.5
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 1
2x
2
4
F
F
A
A
Insert wooden dowel (A) into part (2) and secure bolt (F) into part (4) as per diagram.

P.6
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 2
2
2
4
H
G
J
Using washer (G) and Nut (H) secure part (2) into part (4) with Wrench (J) as per diagram.

Step 3
P.7
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
C
D
4
3
Using bolt (C) attach part (3) to part (4) with Hex key (D) as per diagram.
Note:Do not fully tighten all bolts.

Step 4
P.8
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
D
C
H
G
J
2
2
4
3
Using washer (G) and Nut (H) secure part (2) into part (4) with Wrench (J) ,then using bolt (C)
attach part (3) to part (4) with Hex key (D) as per diagram.

Step 5
P.9
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
B
BB
BB
1
2
2
BB
Using Flat head screw(B) secure part (2) to part (1) with Philips head screwdriver as per diagram.
Note: Fully tighten all bolts.

Step 6
P.10
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
K
M
1
Using screw (K) attach Velcro strap (M) into part (1) with Philips head screwdriver as per diagram.