Walker Edison W52FP18AV User manual

Item#: W52FP18AV
Assembly Instructions
  


    P.1

Insert wooden dowel (A) into fireplace faceplate (9). Secure cam bolt (B) to fireplace faceplate
(7,8) and top panel (1).
Insert wooden dowel (A) into side panel (3,4,5,6).

Insert fireplace faceplate (7,8) into side panel (5,6), then insert and secure cam lock (C) to side
panel (5,6) to lock it.
Use wrench (R) to secure bottom panel (2) to side panel (3,4,5,6) with bolt (D).

Slide back panels (11) into grooves. Insert top panel (1) into side panels (3,4,5,6) and fireplace
faceplate (9), then insert and secure cam lock (C) to side panels (3,4,5,6) and fireplace faceplate
(9) to lock it.
Insert leg (15) into support bar (16), then use wrench (R) to secure support bar (16) with washer
(G) and bolt (F).

Use wrench (R) to secure leg (15) and support bar (16) to bottom panel (2) with washer (G) and
bolt (E).
Secure plastic wedges to back panel (11) with screw (K).

Place sticker (Q) over holes as per diagram.
Insert shelf support pin (H) into side panel (3,4,5,6), place shelf (10) on top of shelf support
pin (H).

Attach handle (N) to door (13,14) with bolt (P). Secure hinge (L) to door (13,14) with screw (M).
Secure hinge (L) to door (13,14) to side panel (3,4) with screw (M).

Secure fireplace insert (U) with screw (T) as per diagram.
Attach part (12) behind the fireplace unit by using cam bolts (B) and cam locks (C).

Place sticker (Q) over holes as per diagram.