Walker Edison D48UBC30 User manual

Use wrench (W), bolt (M) to secure the side frame (13,14,15) to the side panel (1,2,3).
Disassemble keyboard tray slider (N) by sliding the tray arm and tray bracket apart. Depress
the small lever of the tray bracket and carefully pull the two pieces apart. Repeat this process
for both keyboard tray sliders (N).

Secure screw (L) to the tray arm of keyboard tray slider (N) to the side panel (2,3).
Secure screw (L) to the tray bracket of keyboard tray slider (N) to the drawer side panel (10,11).

Insert cam bolts (B) into side frames (1)(2). Use bolt (V) to secure velcro strap (U) into
side frame (1).
Insert the USB Interface (S) into side frame (1) and secure it with screw (L).

Insert wooden dowels (A) and bolts (B) into the table top.
Insert wooden dowels (A) into back panel (5) and drawer panels (9)(10)(11).

Use Wrench (W) and Bolt (D) to secure the L Shape Bracket (E) to the Shelving Board (6)(7).
Use Wrench (W), Bolt (D) to secure the L Shape Bracket (E) to the Shelving Board (6)
and Side Frame (1)(3).

Use Wrench (W), Bolt (D) to secure the L Shape Bracket (E) to the Shelving Board (7)
and the Side Frame (1)(3).
Use Cam Lock (C) to secure the Table Top (4) to the Side Frame (1)(3).