Walker Edison W70MX2D User manual

P.1
AssemblyInstructions
Item#: W70MX2D
Revised 23/04/2019 (E)
Copyright 2019 byWalker Edison FurnitureCo., LLC. All rightsreserved.
Pleasevisit our websitefor the most current instructions, assemblytips, report damage,
or requestparts. www.walkeredison.com
Walker Edison
TM

VIII. Drill maybe needed forsecuring product to wall.
P.2
GeneralAssemblyGuidelines
I. Ensure that all partsand hardware are available before beginning assembly.
II. Followeach step carefully to ensure the properassembly of this product.
21
III. Two people are recommended forease in the assembly of this product.
IV. The three main typesof hardware used to assemble this product are: wood
dowels, screwsand bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole forthe dowel, place a small amount of glue in the hole
and insert the dowel. Wipe awayexcess glue immediately.
In future assembly stepswhen dowels are necessaryto attach assembly parts
together, place a small amount of glue on the end of the dowelbefore attaching
partstogether. Wipe awayexcess glue immediately.
VI. APhillipshead screwdriveris required forthe assemblyof this product .
VII. Powertools should not be used to assemble this product.
Copyright 2019, byWalker Edison FurnitureCo., LLC. All rightsreserved.

P.3
Copyright 2019, byWalker Edison FurnitureCo., LLC. All rightsreserved.
PartsList
1
2
345
7
6
9
8
10 10 11
11
12
12
13
13
14
14
15 15

HardwareList
The hardware quantities listed above are required for proper assembly.
Someextrahardware may also have been included.
A
Philipshead screwdriverrequired forassembly
(not included)
P.4
20 pcs Wooden dowel8x30mm
Copyright ©2019, by Walker Edison Furniture Co., LLC. All rightsreserved.
B14 pcs Cambolt6x35mm
C14 pcs Camlock15x11mm
D14 pcs Sticker30mm
E 8 pcs Screw6x50mm
F 1 pc HexKeyM4
G16 pcs Bolt6x15mm
H 8 pcs 6x15mm
J 8 pcs L shape bracket
K 8 pcs Plastic wedge
L 8 pcs Screw3x17mm
M
2
Bolt
N
4
Ppcs Knob
pcs
Bolt4x22mm
4
24
pcs
West hinge
pcs
Screw3x14mm
Q
R
1pc Glue tubeS
8pcs Shelf support pin8x5x16mm

Step 1
P.5
Copyright 2019, byWalker Edison FurnitureCo., LLC. All rightsreserved.
B
B
B
B
B
B
1
Insert cam bolt (B) to part (1) secure with Philips head screwdriver .

Step 2
P.6
Copyright 2019, byWalker Edison FurnitureCo., LLC. All rightsreserved.
x2
B
B
B
AAAAAAA
A
AAAAAA
3
4
5
11
Insert wooden dowel (A) and cam bolt (B) to parts (3,4,5,11) with Philips head screwdriver .

Step 3
P.7
Copyright 2019, byWalker Edison FurnitureCo., LLC. All rightsreserved.
BBB
AAAA
F
GGG
JJJJ
6789
Using bolt (G) secure L shape bracket (J) to parts (6,7,8,9) with hex key (F) ,then using can bolt
(B) insert to parts (6,7,8,9) with Philips Head screwdriver as per diagram.

Step 4
P.8
Copyright 2019, byWalker Edison FurnitureCo., LLC. All rightsreserved.
F
H
H
H
H
9
8
8
13
13
Using bolt (H) secure part (13) to part (8) with hex key (F) ,using bolt (H) secure part (13) to part
(9) with hex key (F) as per diagram.

Step 5
P.9
Copyright 2019, byWalker Edison FurnitureCo., LLC. All rightsreserved.
F
H
H
H
H
6
6
7
13
13
Using bolt (H) secure part (13) to part (7) with hex key (F) ,using bolt (H) secure part (13) to part
(6) with hex key (F) as per diagram.

Step 6
P.10
Copyright 2019, byWalker Edison FurnitureCo., LLC. All rightsreserved.
21 3
C
C
5
11
Using cam lock (C) secure part (11) to part (5) with Philips head screwdriver as per diagram.