Walker Edison BU52SV6D User manual

P.1
Item # : BU52SV6D
Assembly Instructions
Revised 01/2018
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.

P.2
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
21
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. The provided glue is to secure wood dowels in place . When first inserting dowels ,
locate the appropriate hole for the dowel , place a small amount of glue in the hole
and insert the dowel . Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together , place a small amount of glue on the end of the dowel before attaching
parts together . Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product .
VII. Power tools should not be used to assemble this product .
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.

P.3
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
Parts List
1
2
3
4
5
6
7
8
9
6
6
7
6
8
8
8
9
9
9
9
10
11
12
13
14
15
16
12
13
14
15
16
3 x
3 x

Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
A
Philips head screwdriver required for assembly
(not included)
P.4
B
C
D
E
F
G
H
J
K
pcs
pcs
pcs
pcs
L
M
N
P
Q
30 pcs
Wooden dowel
Ø8x30mm
pcs
pcs
R
S
pcs
X
pcs
pcs
Cam lock
Ø15x11mm
Ø6x35mm Cam bolt
24
48
Ø6x50mm 6
Bolt
Screw
Ø3x17mm 16
Ø4x22mm 24
Handle Bolt
1
Glue tube
60
Handle 12
Plastic wedge 16
1
Ø30mm 48
Sticker
pcs
pcs
Screw
Ø4x14mm
M 4 Wrench
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
sets
6
* Note: This piece comes preassembled for
shipping purposes and must be disassembled
to complete assembly.
Drawer slider
pcs
20
Bolt
Ø6x12mm
3pcs
Wooden dowel
Ø8x50mm
pcs
Ø6x64mm Cam bolt 3
pcs
24
Ø15x9mm Cam lock
pcs
Screw
Ø3x25mm 30
T 2 pcs
Flat plate
94x15x2mm
U 4 pcs
Screw
Ø4x12mm
W 2 pcs
Plug
Ø8x30mm
V 2 pcs
Screw
Ø3x26mm

Step 2
Step 1
P.5
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
X
X
X
X
X
X
X
S
S
S
S
S
S
S
S
S
S
S
S
S
4
13 x6pcs
12 x6pcs
Disassemble drawer slider (X) by sliding the slider arm and slider bracket apart. Depress
the small lever of the slider bracket and carefully pull the two pieces apart. Repeat this
process for both drawer sliders (X).
Secure slider arm (X) to side panel (4) with screw (S).
Secure slider bracket (X) to drawer side panel (12,13) with screw (S), repeat this step six times.

Step 4
Step 3
P.6
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
X
S
S
S
S
S
S
S
S
SS
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
A
A
A
AA
A
A
A
A
AA
A
CC
C
C
C
C
4
4
3
35
5
X
XX
X
XX
X
X
Secure slider arm (X) to side panel (3,4,5) with screw (S). Please note side panel (4) will
have slider arm (X) on both sides.
Insert wooden dowel (A) into side panel (3,4,5) and secure cam bolt (C) to side panel (3,5).

Step 6
Step 5
P.7
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
x 6
AAA
AAA
A
A
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
1
66
6 6
7
7
10 x3pcs
11 x3pcs
16
Insert wooden dowel (A) into part (6,7).
Insert wooden dowel (A) into part (16), repeat this step six times.
Secure cam bolt (C) to top panel (1).
Secure cam bolt (C) to drawer front panel (10,11), repeat this step three times.

Step 8
Step 7
P.8
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
21 3
21 3
B
B
B
D
D
D
E
E
E
E
E
E
4
5
6
6
6
6
7
7
5
Insert side panel (5) into part (6,7), then insert and secure cam lock (E) to part (6,7) to lock it.
Insert wooden dowel (B) and cam bolt (D) into part (6,7) first, then insert side panel (4) to
part (6,7), then insert and secure cam lock (E) to part (6,7) to lock it.

Step 10
Step 9
P.9
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
21 3
21 3
E
E
E
E
E
E
4
3
6
6
6
6
7
7
5
Insert side panel (4) into part (6,7), then insert and secure cam lock (E) to part (6,7) to lock it.
Insert side panel (3) into part (6,7), then insert and secure cam lock (E) to part (6,7) to lock it.

Step 12
Step 11
P.10
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
H
H H
H
H
H
K
4
4
3
3
5
5
2
8
8
Slide back panels (8) into grooves as per diagram.
Use wrench (K) to secure bottom panel (2) to side panel (3,4,5) with bolt (H).