Walker Edison D48X30 User manual

06/2014

Attach side panels (2,3) to legs (1) using bolts (A). Insert wooden dowels (K) to support
bar (10).
Disassemble keyboard tray sliders (E): Slide the tray arm and tray bracket apart then
depress the small lever on the tray bracket and carefully pull the two pieces apart.

Attach tray arms (E) to side panels (2,3) using screws (F).
Attach desk frame (4) to legs (1) using bolts (B), spring washers (C) and washers (D).

Secure cam bolts (H) to drawer panel (5).
Attach drawer panel (5) to drawer panels (7,8) using cam locks (J).

Carefully slide drawer panel (9) using the thin grooves. Insert support bar (10) into drawer
panel (5).
Attach drawer panel (6) to panels (7,8,10) using screws (G).

Cover all cam locks with stickers (M).
Attach tray brackets to drawer panels (7,8) using screws (F).

Carefully insert drawer assembly to assembled unit.
Insert rubber suction cups (L) to desk frame (4).

Carefully place glass (11) on top of rubber suction cups and desk frame.
4