walkntalk PWU-B10K User manual

– 2 YEAR WARRANTY
WalknTalk will replace the faulty product at no cost to the
consumer. The warranty does not extend to any
consequential damages or cost that may be incurred and
is valid for 24 months from date of purchase. The
consumer must return the faulty product to the retail
store it was purchased from together with proof of
purchase.
The warranty is provided by:
Pacific Optics (in Australia)
18 Taree St, Burleigh Heads, QLD 4220
Telephone: [phone]
Email: [email protected]
Signature Marketing NZ Ltd (in New Zealand)
25a Triton Drive, Rosedale, Auckland 0632
Telephone (NZ): [phone]
Email (NZ): [email protected]
The benefits to the consumer under this warranty are in
addition to other rights and remedies of the consumer
under Australian laws in relation to the goods to which
the warranty relates. Our goods come with guarantees
that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for
major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Quick Start Guide
What’s included:
Product Overview:
PWU-B10K
Fast
Charge
10000mAh
Power Bank
with 20W USB-C Power Delivery
and Quick Charge
i
USB-A Port OUT
USB-C Port IN/OUT
Power Button
Digital Display
100
Front

Specifications
Stay Connected
1 Charging your devices
.2 Recharging your power bank
.
For the most up-to-date assistance, please scan this
QR Code for more information about this product.
3. For more information.
@walkntalk_ walkntalk.com.au@walkntalkau
Battery Capacity: 37Wh,10000mAh
Battery Type: Lithium-ion
USB-C Input: 5V/3A, 9V/2A, 12V/1.5A 18W Max.
USB-C Output: 5V/3A, 9V/2.22A,12V/1.67A 20W Max.
USB A Output: 5V/3A, 9V/2A,12V/1.5A 18W Max.
Shared Output: 5V/3A 15W Max.
Connect your device by using a compatible USB
charging cable (not included). Insert a USB-A or
USB-C cable connector into your chosen output
port on the power bank.
Once connected, the power bank will automatically
start charging and the digital display will indicate
the percentage of battery remaining.
Connect your power bank to a suitable USB power
source to recharge it. The power bank can be
recharged via the USB-C port (18W Max). When
recharging the power bank, the battery level
remaining will flash on the digital display.
Handy hints:
- To charge devices with high power requirements,
such as tablets, you should use only the USB-C port.
If more than 1 output port is in use, a maximum of 15W
will be shared for charging all connected devices.
- As a safety precaution, the power bank will
temporarily stop charging or recharging if it gets too
hot and the display will flash "188".
When the power bank has less than 5% battery
remaining, the digital display will flash to indicate it is
time to recharge the power bank.
USB-A Output:
High speed charging of
all smart devices that
support USB charging
USB-C Input/Output:
High-speed charging for
iPad and smartphones that
support PD charging
USB-A SIDE
USB-C SIDE
100
Back