Wallbarz Family 2W User manual

HOME SPORTS SET
Family 2W
DSKM-2S-8.06.G1.490.18-14
User's Manual EG-KSK-002
PROOF OF ACCEPTANCE
The sports set complies with the following applicable standards: STO 71030909-003-2009, GOST 25779-90, DIN EN 71-1:2006, DIN EN 71-
3:2002, DIN EN 71-8:2006 and recognized serviceable.
Manufacturing date «___»______________ 20 __. Packer____________________
Quality Control Department____________________
Recreation and Sports Equipment Plant, CJSC
Montazhnyj Projesd 6b, 428037 Tscheboksary,
Tschuwaschische Republik, Russland
Tel./Fax: [phone],
E-Mail: [email protected]
www.wallbarz.com

16.02.2018
2
THANK YOU for choosing Family 2W!
ATTENTION
For attention of the Installer
It is necessary to make installation of the product in accordance with
the Assembly and Installation Guide. After installation is complete, you
should transfer the Data Sheet to the owner of the product. Please
remind the owner of the need to study the instruction for safe opera-
tion.
Not for public use - for
private use only.
Not intended for use by
more than one user.
Read the Data Sheet carefully for acquaintance with the rules of assembly, safe operation, maintenance, transport,
and storage of Family 2W, hereinafter –the SET.
Assembly, disassembly, and installation works of the SET should be carried out by at least 2 persons after studying the
Data Sheet.
It is recommended to keep this Data Sheet during the whole operation period of the SET.
The manufacturer has the right to make changes in the design, the packaging arrangement, as well as in the prod-
uct specifications during improvement of its products without prior notice about these changes.
In order to avoid injuries the following is prohibited:
- presence of children by the SET installation and participation of children in the SET installation;
- carrying out the SET adjustment by children;
- carrying out children training using the SET without adult supervision;
- carrying out training without soft rugs;
- carrying out children training using the SET by more than one child.
The COMPLEX safety is confirmed by Data Sheets of conformance:
•TÜV NORD, Data Sheet № 44 780 13122111 dated 05.04.2016.
TEACH YOUR CHILD TO PLAY SAFELY:
Do not go close to moving parts, in front of moving parts, behind or between moving parts.
Do not twist cords holding the swing set, do not swing the empty swing set, do not loop the swing ropes over the upper crossbar.
Do not swing sideward on swings in relation to the adjacent swing.
Do not twist the ropes holding any other attached equipment.
Use the equipment only for its intended use.
Do not leave the equipment while it is in motion.
Do not climb the equipment and do not swing with wet hands, do not use the wet equipment (after cleaning, for example).
Do not stand in the rings.
Do not use hammers, saws, nails, and wrenches on the equipment.
Do not climb up the upper support of the swing set;
Do not adapt to the play hardware elements that are not designed specifically for use with this equipment, such as (the list is not
limited to): jump ropes, clotheslines, leads, cables and chains. They can become the reason of suffocation.
Watch for other children while going on swings or playing close to the equipment.
ADULTS ARE ALSO OBLIGED TO:
Set the maximum height of climbing and swinging according to physical abilities of each child.
Provide children with the appropriate clothes for playing. Use comfortable shoes with slip-proof soles, sensible clothes without
chains, scarves, hoods, cords, ties, ponchos, etc. Any child's clothes part stuck in the equipment may cause serious injuries.
Make sure that the attached equipment is firmly mounted;
Remember about children’s creativity. Be ready to “change the rules” of unsafe games created by children.

16.02.2018
3
1GENERAL DATA
The Set is designed to be used inside living spaces for
sports and playing exercises.
ATTENTION
CHILDREN USING THE SET MUST BE SUPERVISED BY
ADULTS
Due to the ongoing work on the products improvement changes may be made, which are not mentioned in the Data
Sheet. These changes do not impair the consumer properties of products.
2. MAIN TECHNICAL CHARACTERISTICS Table 1
Dimensions, mm
length
840
width
860
height
2270 max
Gross weight, kg, max:
28
Maximum applied weight, kg, for gymnastic ladder and pull-up bar:
100
Maximum applied weight, kg, for accessories:
50
Child minimum age, years
3
Operation lifetime, years (min).
5
Premises height: H min , mm
2100
490
2270 max
860
840
2080
101
100
103
490
2270 max
860
840
2080
101
100
103
Safety zone
1000
500
4901000 1000
500
4901000
Pic.1
3. Product composition
3.1. Basic structure of the SET
3.1.1. The SET is a demountable frame structure made out of metal pipes; installed by attaching to the wall.
3.1.2. The basic components of the SET are:
•Vertical gym ladder;
•Movable pull-up frame;
3.1.3. Accessories may be installed on the SET parts for the purpose of performing sporting exercises and gaming.
3.2 Information about the materials used
All the materials applied for production of the SET are authorized for use in products intended for children. All the materials have the neces-
sary Sanitary, Safety and Health Certificates.
Shock-absorbing cover (soft mat)

16.02.2018
4
4. CONFIGURATION Table 2
№
Component parts
Q-ty
piec
es.
№
PE
pac
kag
e
№
pac
kag
e
№
Component parts
Q-ty
piec
es.
№
PE
pac
kag
e
№
pack
age
Designation
Pic.
Designation
Pic.
9
Casing
DSK 05-011-20
4
1
1
62
Bolt М8х55.56.016
2
1
1
10
Plug
DSK 05-012-20
4
1
1
75
Nut М8.4.016
8
1
1
29
Bracket support
1.DSK 42х25х250-01.001+
DSK 02-038
6
1
79
Coach screw 8х80
DIN 571
6
1
1
30
Support casing
DSK 05-034-20
6
1
1
81
Washer 8.01.016
10
1
1
31
Collar
1.DSK 42х25Pl.001-200
12
2
1
87
Expansion bolt shield
12х70
PP
6
1
1
38
Half-ring
DSK 05.072.00
12
2
1
93
Screw М8х45.58.016
6
1
1
140
Plug D17
DSK 05.095.00-200
12
1
1
94
Screw М6х30.58.016
6
1
1
141
Plug D12
DSK 05.096.00-200
12
1
1
95
Nut М6.4.016
6
1
1
161
Lower half-ladder
1.DSKМ-Ln4.06.490.180
(with plugs)
1
1
Wrench
S=24х13 mm
1
1
1
Hex wrench
S=6 mm
1
1
1
162
Upper half-ladder
1.DSKМ-Lv4.06.490.180
(with plugs)
1
1
Hex wrench
S=5 mm
1
1
1
Documents
User's manual
Accessories
114
Movable pull-up frame
DSKM-VО
92.56.G1.490.00-20
See table 3
1
1
101
Gymnastic rings
DSK-VO 91.03.11-21
See table 5
1
1
100
Rope
DSK-VO 91.02.11-21
See table 4
1
1
103
Rope ladder
DSK-VO 91.05.10-22
See table 6
1
1

16.02.2018
5
Movable pull-up frame
DSKM-VО92.56.G1.490.00-20
Table 3
№
Component parts
Q-ty pieces.
№
PE package
№
package
26
Bar 1.DSK 039.00-20
1
1
28
Collar 1.DSK42х33,5 Pl.001-200
8
3
1
38
Half-ring 33,5 DSK 05.072.00
16
3
1
49
Reel clip DSK 05.109.00-20
6
3
1
52
Bar assembled 1.DSKM 066.00-20
1
1
53
Brace assembled 1.DSKM 065.00-20
2
1
54
Half-collar 25 DSK 05.060.01-20
4
3
1
55
Half-collar DSK 05.060.02-20
4
3
1
Standard items
65
Bolt М8х75.58.016
4
3
1
75
Nut М8.4.016
8
3
1
81
Washer 8.04.016
4
3
1
91
Cap №13
8
3
1
93
Screw М8 х 45.58.016
4
3
1
94
Screw М6 х 30.58.016
8
3
1
95
Nut М6
8
3
1
140
DSK 05.095.00-200 Plug D17
8
3
1
141
DSK 05.096.00-200 Plug D12
16
3
1
Rope DSK-VO 91.02.11-21
Table 4
№
Designation
Pic.
Q-ty pieces.
№
PE package
№
package
100.1
Rope assembled
1
4
1
100.2
Bracket
DSK 2.051.00
1
4
1
100.3
Shaft
DSK 03.030.00
1
4
1
100.4
Screw М5-7gх 12.56
2
4
1
100.5
Washer 5.01.016
2
4
1
100.6
Washer 5.65G
2
4
1
Gymnastic rings DSK-VO 91.03.11-21
Table 5
№
Component parts
Description
Q-ty pieces.
№
PE package
№
package
101.1
DSK 05-038-21
Ring
2
5
1
101.2
DSK-VO 91.03.11.001-02
Rope 10mm
2
5
1
110
DSK 02-009-01
Fastener
2
5
1

16.02.2018
6
Rope ladder DSK-VO 91.05.10-22
Table 6
№
Designation
Description
Q-ty pieces.
№
PE
package
№
package
103.1
Rope ladder assembled
1
6
1
110
DSK 02-009-01
Fastener
2
6
1
5. TRANSPORTATION AND STORAGE
5.1. The SET is transported in the producer’s original package by any kind of transport which provides its safety.
5.2. Before the SET is installed in its working position it should be stored in the producer’s original package in a dry room with natural air
ventilation.
5.3. SET storage conditions correspond to 2 (C) in accordance with GOST 15150-69.
5.4 After using the SET, if it is necessary to transport it to another location, it is recommended to use the Manufacturer’s packaging.
6. DISPOSAL
6.1 Before sending the SET for disposal it is necessary:
•To dismantle the SET;
•dismantle the SET. Dismantling the SET should be performed in the reverse order to the assembly;
•sort items by kinds of materials used for their manufacturing.
6.2 The SET does not contain any hazardous substances.
6.3 Waste disposal is performed according to the requirements of local sanitary norms and regulations.
7. WARRANTY
7.1 Product warranty period is 12 months since the date of purchase.
7.2 The warranty does not extend to products:
•damaged during transportation by the customer;
•stored, assembled, and operated with violation of instruction set forth herein;
•having no stamps about packaging, Quality Control, and sale in the Data Sheet.

16.02.2018
7
8. MOUNTING GUIDE
8.1 Operating restrictions.
8.1.1 Gypsum board walls or similar walls cannot be used for the SET mounting.
8.1.2 The SET cannot be installed in corners.
8.2 Installation of the SET indoors.
8.2.1 Maximum ceiling and floor unevenness level is 8 mm.
8.2.2 When the SET is installed on wooden or parquet floors, etc., it is recommended to use a 16 –20 mm thick additional layer
of plywood; the dimensions of the plywood sheet are determined on the spot (the sheet should be placed at least on two floor beams).
8.2.3 Free access to the SET should be provided.
8.3 Preparation for assembling, tools and facilities.
8.3.1 Unpack the SET.
8.3.2 Place the component parts onto the previously prepared surface (table, floor).
8.3.3 Make sure that the delivery completeness corresponds to the Data Sheet for your SET.
8.3.4 The tools used for assembling of the SET are indicated in Table 7:
Table 7
Name
Quantity, pieces
Wrench S=24х13 mm
1 (included in the supply package)
Hex wrench S=6 mm
1 (included in the supply package)
Hex wrench S=5 mm
1 (included in the supply package)
Plummet
1
Not included in the supply
package
Builder's level
1
Stepladder
1
8.4 Safety measures.
8.4.1 All the SET assembling/disassembling and installation works should be performed by at least 2 persons.
8.4.2 The presence of children during the SET mounting and children’s partaking in the SET mounting are prohibited.
8.4.3 The SET assembling should be performed in steps according to the mounting instructions.
8.5 The sequence of assembling and installation of the SET.
8.5.1. Assemble upper half-ladder item No. 162 with braces item No. 53 and bar item No. 26 of the movable pull-up frame.
Caution! Collars item No. 28 must rest on the ladder bars.
162 53 162 53
28
38
75
53
93
94
95
141 140
140 141
28
38
94
28
38
75
53
93
94
95
141 140
140 141
28
38
94
Pic.3

16.02.2018
8
8.5.2 Assemble upper half-ladder item No. 162 with bar item No. 26.
2626
75 81 5455 6575 81 5455 65
Pic.4
8.5.3 Assemble upper half-ladder item No. 162 with bar item No. 52 of the movable pull-up frame.
5252
5455
81
6575
52
5455
81
6575
52
Pic.5
8.5.5 Join the half-ladders.
10
81
62
9
8175
10
9162
161
10
81
62
9
8175
10
9162
161
Pic.6

16.02.2018
9
8.5.6 Attach the set to the wall:
8.5.6.1 Install brackets item No. 29. Insert screws item No. 93; 94, tighten screw item No. 93, then tighten screw item No. 94.
29 30 93
31
75
95
38
140
94
141
140
29 30 93
31
75
95
38
140
94
141
140
Pic.7
8.5.6.2 Put the SET against the wall. Mark and drill 6 holes according to the expansion bolt shields diameter item No. 87, with depth not
less than the length of the coach screw item No. 79, insert and in the expansion bolt shields item No. 87. Put the SET against the wall and fix
it.Fix the brackets on the ladder stanchions by bolts item No. 97.
79
81
30
29
87
79
81
30
29
87
Pic.8

16.02.2018
10
8.5.6.2 Install reel clips item No. 49; caps item No. 91.
8.5.6.3
III
49
91
49
91
91
III
49
91
49
91
91
Pic. 4
Different sequence of assembly is possible.
8.6 Installation of accessories
8.6.1 Install the rope.
100.1
100.2
100.3
100.5
100.6
100.4
100.1
100.2
100.3
100.5
100.6
100.4
Pic.5

16.02.2018
11
8.6.2 Assemble and install the gym rings.
101.1101.1
3
0
0
m
i
n
50 min
101.1
101.2
3
0
0
m
i
n
50 min
101.1
101.2
101.2
110
280...300 min
50
min
101.2
110
280...300 min
50
min
Pic.6
8.6.3 Assemble and install rope ladder.
103.1
110
280...300 min
50
min
103.1
110
280...300 min
50
min
103.1
110
103.1
110
Pic.7
General view of the set with recommended position of accessories is shown in the Pic.1
8. 7 Mounting quality control.
8.7.1 Using the plummet make sure that the ladder is placed vertically in relation to the floor.
8.7.2 Test the SET by means of applying loads (75 kg min.) to the bar of the pull-up frame.

16.02.2018
12
9. SAFE OPERATION INSTRUCTIONS
9.1. THE SET is intended for use by children of 3 years and above.
9.2. Attention! Children using the SET must be supervised by adults.
9.3. User maximum weight is up to 100 kg.
9.4. The SET is intended for use by only one child at the same time.
9.5. Soft covers (mats) should be placed under and around the SET to prevent injuries. The covers should be capable of pre-
venting injuries considering the maximum height of falling (minimum dimensions: 1,0 x 1,0 x 0,1 m).
9.6 Only one piece of attached equipment may be used at the same time at the SET. The attached equipment (rope, gymnastic
rings) are used for exercises only. Other applications are prohibited (self-
fastening and fastening of other children; swinging by the attached equipment,
its twisting and untwisting).
9.7. Do not attach to the SET the parts and items that are not intended for use
with the SET, such as jumping ropes, washing lines, leads, cables, chains, etc.,
as they may lead to a child injuries.
9.8. When making exercises on the SET, children's clothes and shoes must be
suitable for the size. Avoid wearing chains, scarves, hoods, clothes with cords,
etc. Serious injury may be caused by any part of the children’s clothing becom-
ing entangled in the equipment.
EXERCISE AND PLAYING TIPS:
Regular playing and exercising on the SET lead to improvement of general physical conditions of a child (posture, appetite, sleep).
•To develop strength and physical dexterity the following exercises are recommended:
oon the vertical ladder –climbing up and down the ladder, abdominal press exercises;
oon the climbing rope - pulling up on hands, climbing up along the rope;
oon the rings –pull-ups, front (back) handspring, abdominal press exercises.
•Exact types of exercises, volume and intensity of workload must be determined by adults upon consulting with the specialists (doctors,
sport trainers, etc.).
In case of non-compliance with the safety measures and guidelines for the operation of the SET a child can be injured!
10. INSTRUCTIONS FOR CHECKS AND INSPECTIONS ON BEFORE OPERATION
The following procedures should be done before using the SET:
•Visual inspection of the SET;
•Structural integrity check: make sure that all the components are installed and attached properly.
Failing to perform inspection and examination of the SET may lead to falling or turning over!
11. INSPECTION AND MAINTENANCE INSTRUCTIONS
11.1 Perform visual inspection of the SET each time before using the SET:
•Check the attachment points. If the attachment points are loose, tighten those using standard tools.
Attention! It is strongly prohibited to unscrew the crossbar bolts.
•Check the stability of the joints and supports of the attached equipment made on base of ropes, and cords. Check the integri-
ty of ropes and cords, the absence of wear and damage of fibers of ropes and cords.
•Check the integrity of wooden parts of the attached equipment.
•Make sure that the plastic protection caps are installed onto the fastenings.
•Make sure that the SET and the ladder are installed steadily and firmly.
11.2 Perform functional inspection of the SET once a month. Make sure that the SET is installed steadily and the attachment points are fas-
tened firmly. Check for displacement of the SET elements: compare the initial position and the current position. Tighten all the screws.
11.3 Perform annual basic inspection.
Replace all the broken component elements with the equivalent parts produced by the Manufacturer.
Production and replacement of the component parts by users is prohibited.
ATTENTION
USING THE SET WITHOUT SHOCK-
ABSORBING COVERS MAY LEAD TO
SERIOUS INJURIES WHEN FALLING.