Wampat W06F3052W User manual

W06F3052W
Assembly Instructions
Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.

1-1

1
1
2
3
4
5
6
7
8
10
9
9
11
13
12
14
6
15
16

２
● The provided glue(G) is to secure wood
dowels(A) in place . When first inserting
dowels, locate the appropriate hole for the
dowel , place a small amount of glue in the
hole and insert the dowel . Wipe away
excess glue immediately.
● In future assembly steps when dowels are
necessary to attach assembly parts together,
place a small amount of glue on the end of
the dowel before attaching parts together.
Wipe away excess glue immediately.
Philips head screwdriver
required for assembly
(not included)
Wooden dowel
Ø8x30mm
Cam bolt
Ø6x35mm
Cam lock
Ø15x11mm
Cam lock
Ø15x9mm
Sticker Ø4x44mm
Screw Glue tube
Drawer slider
screw
Ø3x12mm Ø5/32"x12mm
Handle bolt
Handle Ø4x32mm
Screw
Plastic wedge Flat-head screw
Ø3x17mm Footpads Ø4x12mm
Screw
Ø4x25mm
Screw
Plastic strap Nut
A B C D
EFGH
J
IKL
MNP
O
Q R S
1 2
1 2
x 22 x 16 x 12 x 4
x 16 x 6x 1x 1
x 12 x 2 x 1x 8
x 8x 8x 4x 1
x 1x 1x 1Tx 1

３
1
· Screw Cam bolts (B) into panels (4,5,6).
· Insert dowels (A) into panels (4,5).
· Attach panels (6) to panels (4,5).
· Insert and secure cam locks (C) to panels (4,5) to lock it. Ø8x30mm Ø15x11mmØ6x35mm
4
5
6
B
A
C
5
4
6
BA C
1 2 3
x 8
x 4x 4

4
2
Ø8x30mm Ø4x32mm
· Insert dowels (A) into panels (4,5).
· then attach panels (9) to panels (4,5) using screw (L).
5
4
9
9
A
L
LA x 4x 4

5
3
Ø3x12mm
· Attach Slider arms to panels (9) with screws (I) correctly.
· Separate the slider bracket from the slide arm as per diagram.
I
H
5
4
9
9
I
x 6
x 1
Slider arm
Slider arm
Slider bracket
Slider bracket

6
4
Ø8x30mm Ø15x11mm
·Attach panels (4,5) to panel (2).
·Insert and secure cam locks (C) to panel (2) to lock it.
· Insert dowels (A) into panel (2).
4
5
2
A
AC
1 2 3
x 4x 4

7
5
·Carefully slide panel (7) into place along the back of the assembly.
7
4
5
2

8
6
Ø8x30mm Ø6x35mm Ø4x44mm
· Screw cam bolts (B) into panel (1).
· Insert dowels (A) into panel (1).
· Attach panel (11) to panel (1) with screws (F).
1
B
11
B
AF
A
F
x 4x 2 x 2