Wampat MTS2150 User manual

MTS2150 MTS2180
M-WA1501B

1-2

11

Ex 8
Cx 16Bx 8 Dx 28Ax 8
Gx 1Fx 8 Hx 4
Ix 14 Kx 2Jx4 Lx 2

Attach panels (1,2) to legs (3) with screws (F) .
Screw part (F) in half,not all.
Fx 8 Gx 1

Screw parts (K1) into panel (8) ,then over cover (K1) with K2.
8
K
K1 K1
Dx 4 Kx 2
Step 1 Step 2
D

x8
A
1
5
6
2
8
A
C
B
Screw part (A) into panel (8);
Insert dowels (C) into panels (1,2,5,6), then attach panels (1,2,5,6) to panel (8);
Insert and secure cam lock (B) to panels (1,2,5,6) to lock it.
8
Bx 8 Cx 8

Slide part (7) into designated area.
7
2

Insert dowels (C) into panels (1,2,5,6) .
then attach panels (4) to panels (1,2,5,6) with screws (E) ;
Screw part (M) into legs (L),then attach legs (L) to panel (4) .
4
2
1
Tighten the screws on the legs.
5
6
L
Cx 8 Ex 8 Lx 2

Screw parts (I) into panels (1,2,4,8) .
8
7
2
4
I
1
I x 14

Attach panels (9) to panels (5,6) with screws (H) .
5
H x 4

Attach panels (J) to panels (10,11) with screws (D) .
1011
and
D x 8 J x 4

Attach panels (10,11) to panels (1,2) with screws (D) .
11
1
2
Dx 16

A
A
C
B
Cabinet
Cabinet
Cabinet
Door
Door
Door
·To adjust the vertical height.
Loosen the four screws "A" on
both hinges. Two of them are
usually in slotted holes which
mean and you can adjust up
or down by a few mm.
Then tighten back up.
·To adjust depth.
Loosen screw"B" and adjust
door, if the door can not be
adjusted, please loosen screw
"C", then try again.
Tighten screw "B" and "C".
·To adjust side ways.
Turning the screw "C" on
BOTH hinges on each door.

Final Assembly