Wampat W09B3101B User manual

W09B3101B
Assembly Instructions
Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.

1-3

1
4
4
4
4
15
3
13
5
11
12
14
14
2
6
78
1
2
2
2
9
10

２
A× 20 B×20 C×16
D× 16 E ×2
I× 20
H× 3
G× 1
J× 1
F× 8
K× 2
Tools Required
(Not included)
This illustration shows how the CAM fastening
system works.
Esta ilustración muestra como funciona el
sistema de fijación de leva.
Cette illustration montre comment le
système de fixation de
la CAME fonctionne.
Lx 4

３
1
C×8 G× 1
D×8 F× 4
F
D
C
G
2
2
2
2
1
·Stick the skid pads (F) on the bottom of the legs (2).
·Install and fix the legs (2) on the four corners under
the table by using parts (C, D, G).

4
2
·Screw parts (A) into panels (6,7,8).
A
A
6
7
8
x 4

5
3
·Screw parts (A) into panel (5).
5
A
A
x 2

6
4
·Insert and secure cam locks (B) to panel (6) to lock it.
·Attach panel (6) to panel (5).
5
6
Bx 2

7
5
·Insert and secure cam locks (B) to panels (7,8) to lock it.
·Attach panels (7,8) to panel (6).
5
7
8
B
6
x 2

8
6
·Insert and secure cam locks (B) to panels (9,10) to lock it.
·Attach panels (9,10) to panels (7,8).
7
8
6
9
10
5
Bx 2

9
7
11
12
·Screw parts (A) into panels (11,12).
A
A×8

10
8
11
12
9
10
5
6
·Insert and secure cam locks (B) to panels (5,6,9,10) to lock it.
·Attach panels (11,12) to panels (5,6,9,10).
B
B×8

11
9
·Screw parts (A) into panel (1).
1
A
A×6

12
10
12
11
1
9
78
10
5
B
5
1
11
B
·Insert and secure cam locks (B) to panels (5,7,8,11,12) to lock it.
·Attach panels (5,7,8,9,10,11,12) to panel (1).
B×6

13
11
13
5
× 3 × 2 ×1
·Attach panel (13) to panel (5) by using parts(G,H).
·Screw parts (E) into panels (5,9,10).
E
H
HEG
G

14
12
·Unscrew these four screws connected to the handles by the screwdriver, then
exchange the position of the screws and the handles as shown in the picture and
tighten the screws from the inside of the drawers.
14 114

15
13
·Stick stickers (I) on cam locks (B).
·Stick part (J) on the bottom of panels (14), then slide
the two small drawers into position.
I× 18 J×1
1 2
14
14
1
J

16
14
·Stick the skid pads (F) on the bottom of the legs (4).
·Install and fix the legs (4) on the four corners under the
panel (15).
CDGF
4
44
4
C
D
G
F
15
x 8 x 8 x 1 x 4

17
15
Attach panel (15) to cushion (3) with screws (L), and
make sure the edges are evenly spaced.
·Screw parts (L) into panels (15,3).
4
4
4
4
15
3
L
Lx 4

18
16
WALL
Ground
We recommend it to be fixed to the wall to prevent the furniture from tipping over.
Wall anchor and hardware are included in the package.
Please make sure hardware is suitable for your walls before installation,
as different wall materials may require different types of anchors.
WARNING
WALL
1
1
1
K
K
K
1 2 3
x 2