Wampat W09B5102B User manual

W09B5102B
Assembly Instructions
Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.

1-3

1
1
2
2
2
2
4
4
4
4
56
7
8
9
10
12
13
14
11
3
15

２
Tools Required
(Not included)
This illustration shows how the CAM fastening
system works.
Esta ilustración muestra como funciona el
sistema de fijación de leva.
Cette illustration montre comment le
système de fixation de
la CAME fonctionne.
ABC
DEF
GHI
J
x 31 x 31 x 16
x 16 x 3 x 8
x 1 x 31 x 2
x 4

３
1
·Stick the skid pads (F) on the bottom of the legs (2).
·Install and fix the legs (2) on the four corners under
the table by using parts (C, D, G).
CDG
22
2
2
1
F
D
C
G
F
x 8 x 8 x 1 x 4

4
2
·Screw parts (A) into panel (7).
Front
Back
A
7
A
7
x 8

5
3
·Insert and secure cam locks (B) to panels (5,6) to lock it.
·Attach panels (5,6) to panel(7).
Front
6
7
5
B
B
x 5

6
4
·Insert and secure cam locks (B) to panel (8) to lock it.
·Attach panel (8) to panel (7).
8
7
6
5
8
B
7
B
5
x 2

7
5
·Screw parts (A) into panels (9,11).
9
11
A
Ax 3

8
6
·Insert and secure cam locks (B) to panels (9,10) to lock it.
·Attach panel (10) to panel(9).
·Attach panel (9) to panel(11).
B
9
10
11
B
x 3

9
7
·Attach panel (9) to panel (7).
·Insert and secure cam lock (B) to panel (9) to lock it.
·Screw parts (E) into panels (8,11).
E
B
7
11
9
10
E
8
x 3
x 1

10
8
·Screw parts (A) into panels (13,14).
13
14
A
A
x 14

11
9
·Insert and secure cam locks (B) to panels (5,7,8,10,11) to lock it.
·Attach panels (13,14) to panels (5,7,8,10,11).
13
14
8
5
10
11
78
14
13
5
B
B
Bx 14

12
10
·Screw parts (A) into panel (1).
A
1
A
x 6

13
11
·Insert and secure cam locks (B) to panels (5,6,13,14) to lock it.
·Attach panels(5,6,13,14) to panel(1).
1
5
B
5
14
14
13
13
6
x 6

14
12
·Insert the pulley on the back of the mirror (12) into the slide rail (7), keep the mirror vertical,
then press and hold the top button as shown in the picture and push it up into the slot of the slide rail
(11), now you can slide it.
12
11
7

15
13
·Unscrew these two screws connected to the handles by the screwdriver, then
exchange the position of the screws and the handles as shown in the picture and
tighten the screws from the inside of the drawers.

16
14
1 2
·Stick stickers (H) on cam locks (B).
Hx 31

17
15
·Stick the skid pads (F) on the bottom of the legs (4).
·Install and fix the legs (4) on the four corners under the
panel (15).
CDGF
4
44
4
C
D
G
F
15
x 8 x 8 x 1 x 4

18
16
·Screw parts (J) into panels (15,3).
Attach panel (15) to cushion (3) with screws (J), and
make sure the edges are evenly spaced.
4
4
4
4
15
3
J
Jx 4