Warner RF FMT5.0 Series User manual

Operation
All m
enu screenshots are take from FMT5
The m
Initial preparation work
First set up the antenna cable
and connect it to the transmitter's RFOUT port, then plug the power
cord into the transmit
ter's power outlet. Next,
the outlet is divided into two channels. Connection is complete, please turn on the transmitter panel
POWER button, the device starts.
Transmitter Boot I
nterface
Model / equipment name / manufacturer information
FMT5.0 Series
Operation
Manual
enu screenshots are take from FMT5
-
150H , others FMT 5.0 series products are with the same
operation, just the power is different
Version updated frequently
The m
anual may differ with the latest model.
and connect it to the transmitter's RFOUT port, then plug the power
ter's power outlet. Next,
insert the audio cable
to the XLR
the outlet is divided into two channels. Connection is complete, please turn on the transmitter panel
POWER button, the device starts.
nterface
Model / equipment name / manufacturer information
150H , others FMT 5.0 series products are with the same
and connect it to the transmitter's RFOUT port, then plug the power
to the XLR
header or RCA outlet,
the outlet is divided into two channels. Connection is complete, please turn on the transmitter panel

The transmitter starts default
configuration
Transmitter boot.
The progress bar e
select, short press the knob to confirm.
Last Config
Last configuration,
Default config
default configuration, the system default frequency 98MHZ / power O
external modulation / audio pre
PLL lock wait
Waiting time 2-10 seconds.
Main interface
F: Current frequency POW:
Current po
DRIVE: Amplifier Push TEMP:
Amplifier Temperature
Short press the knob to enter the menu settings, turn the knob to s
Menu 1 F
requency setting
Short press the knob to enter the frequency setting.
Current frequency:
current frequency
configuration
The progress bar e
nters the selected setting in
about 10 seconds. Turn the knob to
select, short press the knob to confirm.
Last configuration,
the latest shutdown configuration.
default configuration, the system default frequency 98MHZ / power O
external modulation / audio pre
-emphasis 0 / volume gain 0dB.
Current po
wer VSWR: Standing wave ratio L
Left channel level
Amplifier Temperature
MOD Modulation Level R
Short press the knob to enter the menu settings, turn the knob to s
elect the desired setting menu.
requency setting
Short press the knob to enter the frequency setting.
current frequency
about 10 seconds. Turn the knob to
default configuration, the system default frequency 98MHZ / power O
N /Stereo +
Left channel level
Right channel level
elect the desired setting menu.

Frequency setting:
Set the frequency
Turn the knob to adjust the frequency setting, short press the knob to confirm the frequency setting.
The PLL locks again for each frequency setting. After the lock is completed, return to menu 1
frequency setting.
Menu 2 RF P
ower setting
Short press the knob to enter the power setting.
Current RF power:
Current RF power
RF power setting:
RF power setting
Turn the knob to adjust the power setting, press the knob to confirm the power setting. And return to
menu 2 power settings.
Menu 3 S
ignal modulation setting
Short press the knob to enter the signal
Set the frequency
Turn the knob to adjust the frequency setting, short press the knob to confirm the frequency setting.
The PLL locks again for each frequency setting. After the lock is completed, return to menu 1
ower setting
Short press the knob to enter the power setting.
Current RF power
Drive: Amplifier push
RF power setting
VSWR: VSWR
Turn the knob to adjust the power setting, press the knob to confirm the power setting. And return to
ignal modulation setting
Short press the knob to enter the signal
modulation setting.
Turn the knob to adjust the frequency setting, short press the knob to confirm the frequency setting.
The PLL locks again for each frequency setting. After the lock is completed, return to menu 1
Turn the knob to adjust the power setting, press the knob to confirm the power setting. And return to

Current signal mode
Current signal mode
Signal mode setting
Signal mode setting
STEREO + EXT MOD
Stereo + External Modulation Input
MONO + EXT MOD
Mono + External Modulation Input
EXT MOD
External Modulation Input
STEREO Stereo Input
Turn the knob to adjust the signal mode setting, short press the knob to confirm the signal mode
setting. And return to menu 3 signal mode setting.
Menu 4 Audio pre-
emphasis setting
Short press the knob to enter the short press k
Current signal mode
Signal mode setting
Stereo + External Modulation Input
Mono + External Modulation Input
External Modulation Input
Turn the knob to adjust the signal mode setting, short press the knob to confirm the signal mode
setting. And return to menu 3 signal mode setting.
emphasis setting
Short press the knob to enter the short press k
nob to enter the signal modulation setting.
Turn the knob to adjust the signal mode setting, short press the knob to confirm the signal mode
nob to enter the signal modulation setting.

Current pre-emphasis
: The current pre
Pre-emphasis setting: Pre-
emphasis setting
Turn the knob to adjust the audio pre
emphasis
setting. And return to menu 4 Audio Pre
Menu 5 Audio Gain Setting
Short press the knob to enter the audio gain setting.
Left + Right Left channel +
Right channel
Left Left channel
Right Right channel
Turn the knob to select the
audio channel setting, short press the knob to confirm the audio channel
setting.
Turn the knob to adjust the audio channel gain in real time.
and R levels to full without OVER. If you want to set mute, adju
exit the audio gain setting. And return to menu 5 audio gain setting.
: The current pre
-emphasis
emphasis setting
Turn the knob to adjust the audio pre
-
emphasis setting, short press the knob to confirm the audio pre
setting. And return to menu 4 Audio Pre
-emphasis Settings.
Menu 5 Audio Gain Setting
Short press the knob to enter the audio gain setting.
Right channel
audio channel setting, short press the knob to confirm the audio channel
Turn the knob to adjust the audio channel gain in real time.
For best sound
quality
and R levels to full without OVER. If you want to set mute, adju
st to MUTE. Short press the knob to
exit the audio gain setting. And return to menu 5 audio gain setting.
emphasis setting, short press the knob to confirm the audio pre
-
audio channel setting, short press the knob to confirm the audio channel
quality
, try adjusting the L
st to MUTE. Short press the knob to

Menu 6 External Modulation Gain Setting
Short press the knob to set the external modulation gain.
Turn the knob to adjust the external
MUTE. Short press the knob to exit the external modulation gain setting. And return to Menu 6
External Modulation Gain Setting.
Menu 7 network settings
Network option detected not install
Menu 8 exit the menu
Short press the knob to exit the menu and return to the main interface.
System sleep
Menu 6 External Modulation Gain Setting
Short press the knob to set the external modulation gain.
Turn the knob to adjust the external
modulation gain in real time. If you want to set mute, adjust to
MUTE. Short press the knob to exit the external modulation gain setting. And return to Menu 6
External Modulation Gain Setting.
Menu 7 network settings
Network option detected not install
ed. Short press the knob to exit.
Short press the knob to exit the menu and return to the main interface.
modulation gain in real time. If you want to set mute, adjust to
MUTE. Short press the knob to exit the external modulation gain setting. And return to Menu 6

Long press the knob in the main menu page to sleep the system, short press the knob to exit the
system hibernation.
System alarm prompts
Warning: V.S.W.R standing wave high! Please check the antenna and cable connection.
Warning: the temperature inside the machine is high! (More than 70 ) Please keep the room clean ℃
and does not exceed 40 .℃
Long press the knob in the main menu page to sleep the system, short press the knob to exit the
Warning: V.S.W.R standing wave high! Please check the antenna and cable connection.
Warning: the temperature inside the machine is high! (More than 70 ) Please keep the room clean ℃
Long press the knob in the main menu page to sleep the system, short press the knob to exit the
Warning: V.S.W.R standing wave high! Please check the antenna and cable connection.
Warning: the temperature inside the machine is high! (More than 70 ) Please keep the room clean ℃
This manual suits for next models
1
Table of contents
Other Warner RF Transmitter manuals

Warner RF
Warner RF FMT5.0-50 User manual

Warner RF
Warner RF FMT3.0 User manual

Warner RF
Warner RF FMT5.0-2U Series User manual

Warner RF
Warner RF FMT5.0-2U Series User manual

Warner RF
Warner RF FMT5.0-4U Series User manual

Warner RF
Warner RF FMT-30A User manual

Warner RF
Warner RF FMT-80D User manual

Warner RF
Warner RF FMT3-150A User manual