Wear & Hear ABH-101 User manual

Quick Start Guide
Model: ABH-101
For detailed, visual instructions, visit
our website www.WearAndHear.com

ŸEar bud pairs
(variety of types and sizes)
ŸEar hook pairs
(3 sizes)
ŸCharging cable ŸWind protection covers
(2 pairs)
ŸHeadset ŸTravel pouch
Package Contents
1

Headset
2
3
9
4
10
11
5
7
1
6
2
28
2 - Magnets to connect
buds when not in use
4 - Neck band
1 - Microphones
3 - Silicone ear buds
and hooks
1 -0 USB charging port
5 - Clips to secure cable
6 - Assistive hearing controls
7 - Music/Call controls
8 - LED indicator
9 - Power button

Charging the Battery
3
Before the first use, charge the battery up to
3 hours until the LED indicator turns green.
Purchased separately
ŸThe LED indicator is red
during charging and turns
green when the headset is
fully charged.
ŸCharge the headset directly
from a wall outlet or computer
USB port.
Turning the Headset ON and OFF
4
1. To turn ON BeHear NOW press and hold the power
button until the unit vibrates and the LED turns
light blue.
2. To turn OFF BeHear NOW press
and hold the power button until
the unit vibrates, and the light
blue LED turns off.
Power
Button
LED

Wearing Recommendations
5
When not in use, ear buds can be secured
with magnets and rest on your chest.

Ear Fittings
6
If the default buds and hooks are not comfortable,
remove them.
If the default buds and hooks are not comfortable,
remove them.
ŸChoose an ear hook with a comfortable fit.
ŸReplace the ear bud, squeezing it gently to attach it to the
oval speaker.
ŸPlace foam covers for wind noise reduction (optional).
Note the “L” and “R” symbols for “Left”
and “Right” on each ear hook.

Manage, customize and get help for your BeHear headset
with the W&H BeHear free smartphone application.
7
Smartphone Application
12:30
Noise Reduction
5 100-5 15-10-15
500Hz 2kHz 4kHz1kHz 6kHz 8kHz
Touch and hold any square in the grid to
adjust the sound.
Sound Tuning
SAVE
Crowd
12:30
Download the W&H BeHear app from the
Google Play Store or Apple App Store and
install it on your phone.

3. Launch the app and follow the prompts.
1. Power OFF the BeHear NOW headset.
2. Press the power button again for
about 5 seconds, until the LED
starts alternating red/blue. Power
Button
LED
006104FF
BeHear NOW
00612048
BeHear ACCESS
Available
006120A5
BeHear NOW
Paired
Connection
12:30
Connect to the Phone
8
For iOS (iPhone) only:
Go to iPhone “Settings” >> “Bluetooth”
and add BeHear NOW to “My Devices”.
BeHear NOW
4. In the W&H BeHear app locate your
BeHear NOW headset, followed by
its serial number, in the Available
section. Tap that entry. When pairing
is complete it will move to the
Paired section.

Personalization
9
2. Choose Personal -> Assessment in the
W&H BeHear app.
4. Save and apply the results to the headset.
1. Put on the headset, inserting the ear buds.
3. Follow the prompts to perform the
hearing assessment.
Adjust the acoustic performance of the headset to suit your
own personal hearing preferences.
SAVE AND APPLY
SAVE IN LIBRARY
Right Ear
Left Ear
500Hz 2kHz 4kHz1kHz 6kHz 8kHz
Normal
Mild
ModerateSevere
62
52
54
41
35
30
64
50
48
29
27
42
Assessment
Hearing Treshold
34
500Hz 2kHz 4kHz1kHz 6kHz 8kHz
2 3 4 5 6
Left Ear
Assessment SAVE
START
Conditions are good. Start
the assessment.
Low Ambient Noise
Six sounds will be played for each ear.
Move the dot on the left to the point you
first hear the sound.
Perform the assessment in a quiet
environmetn. The assessment will stop
automatically if there is too much ambient
noise.
Assessment
4

Hearing Amplification
10
Turn on hearing amplification whenever you need it.
Decrease the hearing volume.
Increase the hearing volume.
Long press to toggle hearing amplification ON/OFF.
Short press to scroll through the hearing profiles.