Weiser Aura User manual

User Manual of Product 1:
Weiser Aura Satin Nickel Bluetooth Door Lock, Remote Sharing
Compatible with Alexa and Google Assistant, Auto Lock,
Create, Disable and Delete Codes Via App, Scheduled and
Maintain up to 250 Codes

How to Perform the Door Handing Process:
THE LEADER IN RESIDENTIAL SECURITY 213826 10/17
2With the door open, install the battery pack to initiate auto-handing.
Install 4 AA batteries in battery pack.
1
4
3The latch will retract and extend to learn the orientation of the door.
If the bolt does not move, make sure the batteries are correctly installed,
the interior assembly is correctly installed onto the mounting plate.
If the door handing process is still unsuccessful after a second
attempt, repeat this process again.
The Status LED will indicate success or failure.
Green: Door handing was successful. Proceed to next step.
Red: Door handing was unsuccessful. Make sure the lock interior
and batteries are correctly installed. Perform step 4B again.
Note: The latch bolt will only retract half way.

THE LEADER IN RESIDENTIAL SECURITY 213826 10/17
Download the Weiser app by scanning the QR code or
visiting www.weiserlock.com/app on your smartphone.
1
Turn on Bluetooth to allow the Weiser app to connect to Aura and stay
within Bluetooth range of the lock
3
2
The Weiser app is needed to use this lock. If this lock was professionally
installed (or installed by someone other than the homeowner), make sure
this step is performed by the homeowner.
How to Add or Remove a Code:
Enter user code to test the lock. A total of 250 customizable user codes
may be programmed.
Create your account and follow the setup instructions in the Weiser app.
4
Weiser