Weiser kevo Touch-to-Open User manual

How to Perform the Door Handing Process:
THE LEADER IN RESIDENTIAL SECURITY 213826 10/17
2Make sure the door is open. Insert the battery pack while pressing and
holding the Program button. Release the button when the battery pack is
all the way inside the lock interior.
Install 4 AA batteries in battery pack.
1
5
3The Status LED will flash red and green, and the lock will beep.
Did the latch bolt bolt retract and extend on its own?
Status LED
4Press and release the Program button again. The latch bolt will retract and
extend on its own.
YES NO
or
Door handing process
was successful! Proceed
to next step after latch
bolt stops moving.
Remove battery pack,
wait 15 seconds,
then attempt the
process again.

THE LEADER IN RESIDENTIAL SECURITY 213826 10/17
I f this lock wa s p ro f e s si o n a ll y i n s t a l l e d (o r i n st a l l e d by s o m e o n e o th e r th a n th e
homeowner), make sure that this process is performed by the homeowner.
1
Continue to follow the instructions inside the app to calibrate the lock so
it learns where you keep your phone during normal use.
3
2
How to Add or Remove eKeys:
Send eKeys to family and friends with Kevo-compatible smartphones.
Follow the instructions inside the app to revoke eKeys.
Follow the instructions inside the app to create an account and enroll your
first smartphone.
4
Download the Kevo app at https://www.weiserlock.com/kevo/app or scan
the QR code.