Welch Allyn ELI 380 User manual

9509-189-01-ENG Rev 2
ELI 380 Quick Reference Guide –Modality Worklist (Orders)
1. Open ECG cover, press power button
2. Enter your user name, or select from drop-down list if you recently signed in
3. Enter your password and select
Successful sign-in will take you to the real-time ECG display
4. Prep patient skin (clip hair, clean, & abrade)
5. Place electrodes on patient and connect lead wires
6. If using the Wireless Acquisition Module (WAM), turn on
7. Select , then select the MWL tab
8. Set Query Code to _____________ in the drop down menu
9. Select , wait for the action to complete, then click OK
10. Select the correct patient, enter technician (if applicable)
11. Press to display the real-time ECG
12. Acquire an ECG by selecting button
To save and send ECG
1. Select to transmit ECG
2. Ensure you see the message
“1/1 ECG(s) Transmitted” then select OK
3. Select to save the ECG and
return to real-time display
To delete and acquire new ECG
1. Select
2. When prompted to “Erase ECG?” select YES
3. Acquire an ECG by selecting
4. Select to transmit ECG
5. Ensure you see the message
“1/1 ECG(s) Transmitted” then select OK
6. Select to save the ECG and
return to real-time display

9509-189-01-ENG Rev 2
ELI 380 Quick Reference Guide –Manual Demographic Entry
1. Open ECG cover, press power button
2. Enter your user name, or select from drop-down list if you recently signed in
3. Enter your password and select
Successful sign-in will take you to the real-time ECG display
4. Prep patient skin (clip hair, clean, & abrade)
5. Place electrodes on patient and connect lead wires
6. If using the Wireless Acquisition Module (WAM), turn on
7. Select button
8. Manually enter all demographic information available and technician. Fields that
are teal must be completed before the ECG can transmit.
9. Press to display the real-time ECG
10. Acquire an ECG by selecting button
To print, save, or send ECG
1. To print the ECG select
2. Select button to send ECG
3. Ensure you see the message
“1/1 ECG(s) Transmitted” then select OK
4. Select to save the ECG and
return to real-time display
To delete and acquire new ECG
1. Select
2. When prompted “Erase ECG?” select YES
3. Acquire an ECG by selecting
4. To print the ECG select
5. Select to transmit ECG
6. Ensure you see the message
“1/1 ECG(s) Transmitted” then select OK
7. Select to save the ECG and
return to real-time display

9509-189-01-ENG Rev 2
ELI 380 Quick Reference Guide –Guest Access STAT ECG
*Use only if user does not have sign-in or a STAT ECG is needed. Guest access is limited.
1. Open ECG cover, press power button if needed
2. Select to immediately enter real-time ECG display
3. Prep patient skin (clip hair, clean, & abrade)
4. Place electrodes on patient and connect lead wires
5. If using the Wireless Acquisition Module (WAM), turn on
6. Select button
7. Manually enter all demographic information available and technician. Fields that are
teal must be completed before the ECG can transmit.
8. Press to display the real-time ECG
9. Acquire an ECG by selecting button
To print, save, or send ECG
1. To print the ECG select
2. Select button to send ECG
3. Ensure you see the message
“1/1 ECG(s) Transmitted” then select OK
4. Select to save the ECG and
return to real-time display
To delete and acquire new ECG
1. Select
2. When prompted “Erase ECG?” select YES
3. Acquire an ECG by selecting
4. To print the ECG select
5. Select to transmit ECG
6. Ensure you see the message
“1/1 ECG(s) Transmitted” then select OK
7. Select to save the ECG and
return to real-time display