Wellav NB100U User manual

NB100U Portable Encoder
Quick Start
Congratulations on purchasing the NB00U. Follow these installation and configuration
instructions to get started. Use the web interface for easiest configuration. If you need
assistance, please contact [e-mail] or www.wellav.com for support.

3Management 1Contents
Unpack the packing box and verify all the items as follow :
If any of these items are missing or damaged, please contact Wellav to
obtain replacements.
2Installation
1. Put NB100U on a right place, ensure the environment is good to avoid
danger or unit damaging.
2. Connect I/O cables (HDMI/SDI/YpbPr/AV&CC) to correct ports on the
back of the unit. Insert the SD card or USB dish for recording or playback.
3. Connect an Ethernet cable from a management network to the unit RJ45
port.
4. Connect the power adaptor then the unit will start.
1x
1x
1x
• NB100U • HDMI Cable• Power adaptor
1x
The NB100U can be managed through its web interface or the Keypads beside
the LCD screen.
• Keypads for management :
a) Press to enter to the menu and confirm or save the configuration.
b) Press to return to previous layer menu.
c) Press , , , to move cursor on the screen.
• Web-GUI for management :
Open a web browser (IE 7 or above, Firefox 3.5 or above, or Chrome) and type:
http://<192.168.1.100> Default account and password are “admin”.
OK
MENU
USB 2.0
HDMI/SDI/CC/MIC
Management PC
RTMP
IP(Internet)
UDP/HLS/RTSP
USB dishSD Card
TV+STB
Mobile
Tablet
PC
Camera HD STB
MicrophoneBlue Player
• SDI Cable • YpbPr/AV&CC Cable
1x