Wells H-63 User manual

WELLS
R A I S I N G T H E S T A N D A R D
H-63, H-65 AND H-70
HOTPLATES
WE L L S M A N U F A C T U R I N G
H-63, H-65 AND H-70 HOTPLATES
Wells Hotplates H-63, H-65 and H-70 have a
reliable, functional design. The H-63 and H-65 have
a wider element to allow for more surface contact
and removable drip trays for easy clean-up. The
H-70 is engineered for uniform heat distribution,
which is ideal for heating large stock pots.
I T E M N O .
Specifications
Dimensions: Inches MM
Overall Dimensions (H-63):
Width 14 3/4 375
Depth 23 1/2 597
Height (incl. 4” legs) 12 3/8 314
Overall Dimensions (H-65):
Width 13 330
Depth 29 9/16 751
Height (incl. 4" legs) 12 3/8 314
Overall Dimensions (H-70):
Width 14 3/4 375
Depth 23 1/2 597
Height (incl. 4” legs) 12 3/8 314
Temperature Settings: OFF/LO to HI
Number of Controls: 2
Weights: Lbs. KG
H-63:
Installed 26 12
Shipping 30 14
H-65:
Installed 22 10
Shipping 26 13
H-70:
Installed 32 15
Shipping 35 16
H-70
H-65
Features
• H-63 and H-65 have eight inch diameter,
one-piece, self-cleaning, spiral-pattern elements
that are individually controlled by an infinite control
with a positive-off position.
• H-70 has french-plate elements that are nine
inches in diameter. The larger surface area allows
even heat distribution that is ideal for heating
large stock pots.
• Control knobs are front-mounted with a
protective guard ring to help prevent
accidental temperature changes.
• Drip Trays are stainless steel and removable
for easy cleaning (H-63 and H-65 only).
• The H-63, H-65 and H-70 Hotplates are
Underwriters Laboratories, Inc. LISTED and
meet the National Sanitation Foundation
and Canadian standards.
• A one-year warranty against defects covers
parts and labor.
Accessories / Options
Legs, set of four, 4” adjustable, metal, 20563
Cordset, 30 AMP, 1Ø, NEMA 6-30P, 20141
H-63 with Cordset, 21622
Export
The following models are available for export
and meet the standards for CE:
• H-70EU, 220-240V, 1Ø, 4 KW
ID WLS0-417 SPEC SHEET 7/3/00, 9:47 AM1

MODELS VOLTS WATTS AMPS PER LINE PHASE 3 AMPS POWER
SINGLE PHASE SUPPLY CORD
H-63 208 3900 16.3 9.4 9.4 18.8 NONE
H-63 240 5200 18.8 10.8 10.8 21.7 NONE
H-65 208 3900 16.3 9.4 9.4 18.8 NONE
H-65 240 5200 18.8 10.8 10.8 21.7 NONE
H-70 208 3000 12.5 7.2 7.2 14.4 NONE
H-70 240 4000 14.4 8.3 8.3 16.7 NONE
H-70EU 220-240 4000 - - - 16.7 NONE
WELLS
A SP E CIA LT Y EQU I P M E NT C OM PA N Y • 20 00 WE L LS M ANUFA CTU R I N G • P R I NTE D IN T H E U.S . A.
6/00 • REV(H) • PART NO. 37090
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A.
USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone] • www.wellsbloomfield.com
MODELS
H-63, H-65, H-70
H O T P L AT E S
WE L L S M A N U F A C T U R I N G
MODEL H-63 & H-70
MODEL H-65
H-63 & 70
H-65
5 1/2
(140)
6 1/2
(165)
10 1/2
(267)
16 9/16
(421)
8 3/8
(213)
14 3/4
(375)
13
(330)
23 1/2
(597)
29 9/16
(751)
4
(102)
H-63, H-65 AND H-70 ELECTRICAL SPECIFICATIONS:
NOTE: Specifications are subject to change without notice. See installation instruction
sheet prior to installing unit. This document is not for installation purposes.
The H-63 and H-65 are equipped with coiled elements. The H-70 has solid elements.
DIMENSIONS:
Denotes export (EU) products.
R
R
R
LISTED STD.4 LR EXPORT
E6070 10836 MODELS
ONLY
MINIMUM CLEARANCE REQUIRED FROM UNIT
TO THE NEAREST COMBUSTIBLE OBJECT.
BACK SIDE BOTTOM TOP
1 1 4 NA
(25) (25) (102) NA
L1 L2 L3
INCH
(MM)
ID WLS0-417 SPEC SHEET 7/3/00, 9:47 AM2