Wells H-336 User manual

WELLS
R A I S I N G T H E S T A N D A R D
Specifications
Overall Dimensions: Inches MM
Diameter 10 254
Temperature Settings: OFF/LO to HI
Number of Controls: 1
Weights: Lbs. KG
Installed 3 1
Shipping 6 3
H-336 BUILT-IN HOTPLATE
H-366 BUILT-IN HOTPLATE
I T E M N O .
WE L L S M A N U F A C T U R I N G
Features
• The six-inch diameter, flat, spiral element
provides more surface contact.
• Control is recessed in a one-piece, drawn,
stainless steel panel to help prevent
accidental temperature changes.
• The element is self-cleaning.
• Temperature is regulated by an infinite
control with a positive-off position and a
signal light to indicate a power-on condition.
• Drip tray is chrome-plated and removable for
easy cleaning.
• The H-336 Hotplate is Underwriters
Laboratories, Inc. Recognized and meets NSF
International standards.
• A one-year warranty against defects covers
parts and labor.
Wells H-336 Built-in Hotplate is dependable and easy-to-use. The flat, spiral element
provides a wider cooking area for more surface contact and is self-cleaning. Drip tray is easily
removable for cleaning.
H-336

R
STD.4
R
(254)
10
(149)
5 7/8
(159)
6 1/4
(122)
4 13/16
(43)
1 11/16
(19)
3/4
(84)
3 5/16
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. • USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone] • www.wellsbloomfield.com
© 2001 WELLS MANUFACTURING • PRINTED IN THE U.S.A. • 2/01 • REV(F) • PART NO. 37117
MODEL
H-336
B U I LT - I N H O T P L AT E
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
WELLS
SUGGESTED CLEARANCE
UNIT TO THE NEAREST SURFACE
BACK SIDE BOTTOM FRONT
1 2 8 4 1/8
(25) (51) (203) (105)
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing
unit. This document is not for installation purposes. The installation of recognized component units requires
additional evaluations to Underwriters Laboratories Inc. standards.
H - 3 3 6 E L E C T R I C A L S P E C I F I C AT I O N S :
H-336 208 2000 9.4 SINGLE NONE
H-336 240 2600 10.8 SINGLE NONE
MODELS VOLTS WATTS AMPS PHASE POWER SUPPLY CORD
NOTE: Depending on the installation,
clearances can be reduced upon further
evaluations to UL standards.
THIS UNIT IS DESIGNED TO BE INSTALLED IN METAL COUNTERS ONLY.