Wells WVPE-30F Configuration guide

WELLS
R A I S I N G T H E S T A N D A R D
WVPE-30F VENTLESS FRYER
WVPE-30F VENTLESS FRYER
I T E M N O .
WE L L S M A N U F A C T U R I N G
Features
• Ventless Hood System exceeds EPA Standard 202
for the release of particulate matter.
• Air Filter Interlock System will not allow heating
element to be energized if the baffle or HEPA
filter is not in place.
• Airflow Sensing System is designed to monitor
airflow through the filtration system to optimize
grease removal efficiency.
• Ansul R-102 Fire Suppression is built into the
Ventless Hood using a unique anti-fire design.
• Manual pressure release system is specially
designed to release steam pressure at desired
rate after completion of cook time.
• Automatic Oil Temperature Control ensures
precise temperatures to produce consistent high
quality products while minimizing energy consumption.
• Flat bar element, located below the basket, is
heavy-duty stainless steel with a low watt density for
longer oil life.
• Repeat cycle timer activates using one push
button operation.
• Oil filter system is easy to operate, and combined
with Flavor Saver Filter Powder, will substantially
increase oil life.
• Round frypot is constructed of spun stainless steel
with a 30 lb. oil capacity.
• Nickel-plated, perforated steel basket has a
detachable handle for lowering and removing
basket from the frypot.
• The WVPE-30F fryer is Underwriters Laboratories,
Inc. LISTED and meets NSF International standards.
• A one-year warranty against defects covers
parts and labor.
Accessories / Options
HEPA Filter, fits all ventless fryers, 22402
Charcoal Filter, fits all ventless fryers, 22403
Flavor Saver Oil Filter Powder, 45 packs, 22410
Oil Filter Paper, 21711
Rear Leg Kit, for remote pull, 22692
Specifications
Overall Dimensions: Inches MM
Width 15 13/16 401
Depth 43 11/16 1110
Height 76 3/8 1940
Oil Capacity: Lbs. KG
WVPE-30F 30 14
Typical Production: Lbs. KG
Chicken frozen 12 5
Chicken fresh 14 6
Weights: Lbs. KG
Installed 425 193
Shipping 525 238
Export
The following model is available for export and
meets the standards for CE:
• WVPE-30FEU,
380-415V, 3Ø, 9300 watts
WVPE-30F

WELLS
LISTED
R
E146882
R
STD.4
R
E146882
LISTED
ONLY
MODELS
EXPORT
(102)
4
(102)
4
(152)
6
(357)
14 1/16
(594)
23 3/8
(330)
13
(915)
36
(1940)
76 3/8
(401)
15 13/16
(1110)
43 11/16
BY ANSUL TECHNICIAN
EITHER LEFT OR RIGHT SIDE
PULL TO BE FIELD INSTALLED
MANUAL FIRE SUPPRESSION
DRAIN
FRYPOT
FILTER
BUILT-IN
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. • USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone] • www.wellsbloomfield.com
© 2001 WELLS MANUFACTURING • PRINTED IN THE U.S.A. • 03/01 • REV(C) • PART NO. 47394
MODEL
WVPE-30F
F R Y E R
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
NOTE: Specifications are subject to change without notice.
SPECIAL ENVIRONMENTAL NOTICE: The hood system is designed to reduce odor emissions but
will not eliminate odors. Air exchange at the installation site must comply with requirements of
the local jurisdictional authority. To ensure dilution of odor build-up, minimum recommendation is
400 cubic feet of fresh air per minute both in and out of the area.
WVPE-30F 208 9000 26.5 25.0 26.5 NA 45.6 NONE
WVPE-30F 240 9000 23.0 21.7 23.0 NA 39.5 NONE
WVPE-30FEU 380-415 9300 15.0 13.0 13.0 3.0 NA NONE
MODELS VOLTS WATTS AMPS PER LINE PHASE 3 AMPS POWER
SINGLE PHASE SUPPLY CORD
L1 L2 L3 N
W V P E - 3 0 F E L E C T R I C A L S P E C I F I C AT I O N S :
Denotes export (EU) products.