Wells F-58 User manual

WELLS
R A I S I N G T H E S T A N D A R D
Export
The following model is available for export and
meets the standards for CE:
• F-58EU, STS, 380-415V, 3Ø, 5.8 KW
F-58 COUNTERTOP AUTOLIFT FRYER
F-58 COUNTERTOP AUTOLIFT FRYER
I T E M N O .
WE L L S M A N U F A C T U R I N G
Features
• The autolift fryer has an adjustable one to
fifteen minute push-button timer that
automatically lifts the fry basket from oil.
• One full-size, rear-hanging fry basket is
included with every fryer.
• Swing-up element, located below the fry
basket, is heavy-duty stainless steel with a low
watt density for longer oil life.
• Element frame assembly has a spring-loaded
support rod to secure element when in a
raised position.
• Deep-drawn, removable frypot is made
of nickel-plated steel and can hold up to
fifteen pounds of oil.
• A manual reset safety thermostat will shut
off the heating element power and illuminate
the signal light if an over-temperature condition
is reached.
• Temperature Control System (TCS), includes
a positive-off precision thermostat to assure
quick recovery.
• The F-58 Fryer is Underwriters Laboratories,
Inc. LISTED and meets NSF International and
Canadian standards.
• A one-year warranty against defects covers
parts and labor.
Accessories / Options
Legs, set of four, metal, 4” adjustable, 20563
Basket, half-size (2 per fry pot), 20161
Basket, full size (1 per fry pot), 20162
Crumb Cradle, 20690
Fry Pot Cover, 21010
Wells F-58 Autolift Fryer is one of the most durable
and easy-to-use fryers in the industry. A swing-up
element allows the frypot to be removed for easy
cleaning. The low watt density heating element
provides extended oil life.
F-58
Specifications
Overall Dimensions: Inches MM
Width 14 3/4 375
Depth 23 1/2 597
Height (incl. 4” legs) 16 3/8 416
Oil Capacity: Lbs. KG
F-58 15 7
Temperature Range: Fahrenheit Celsius
F-58 275º 135º
to 375º to 191º
Pre-Heat Time to 350° F: 4 1/2 minutes
Watts Per Hour to Maintain 350° F: 450
Typical Production: Per Hour
French Fries
2 oz. servings 300
Chicken
pounds
20
Weights: Lbs. KG
Installed 42 19
Shipping 48 22

WELLS
(102)
4
(102)
4
(375)
14 3/4
(213)
8 3/8
(597)
23 1/2
(648)
25 1/2
(305)
12
LISTED
R
E6070
R
STD.4
EXPORT
MODELS
ONLY
R
LR 10836
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. • USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone] • www.wellsbloomfield.com
© 2001 WELLS MANUFACTURING • PRINTED IN THE U.S.A. • 04/01 • REV(I) • PART NO. 37064
MODEL
F - 5 8 A U T O L I F T F R Y E R
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
NOTE: Specifications are subject to change without notice.
F-58 208 5750 - - - - 27.6 NONE
F-58 240 5750 - - - - 24.0 NONE
F-58EU 380-415 5800 9.0 8.0 8.0 1.0 - NONE
F - 5 8 E L E C T R I C A L S P E C I F I C AT I O N S :
MINIMUM CLEARANCE REQUIRED FROM
UNIT TO THE NEAREST SURFACE
BACK SIDE BOTTOM FRONT
NA NA NA 40
NA NA NA (1016)
NOTE: Depending on the installation,
clearances can be reduced upon further
evaluations to UL standards.
MODELS VOLTS WATTS AMPS PER LINE PHASE 3 AMPS POWER
SINGLE PHASE SUPPLY CORD
L1 L2 L3 N
Denotes export (EU) products.