WELLTECH WELLGATE 26XX - V105 User manual

Wellgate 26xx Series
VoIP Gateway
User Manual
Revision Information
Version Date Description
105 Feb-10-2009 3nd English Version
1. Introduction.....................................................................................................3
1.1 26xx Telephony Gateway.................................................................................3
1.2 Benefits.........................................................................................................3
1.3 Physical Interface ...........................................................................................3
1.4 Specification...................................................................................................4
1.5 Setting and maintenance.................................................................................5
1.6 Environmental................................................................................................5
2. Appearance......................................................................................................6

26xx Technical Manual EN-V105
2.1 Front Panel: LED Indicators...........................................................................6
2.2 Rear Panel: LED Indicators............................................................................7
3. Environment Setup and IP Connection................................................................9
3.1 Configuration .................................................................................................9
3.2 Network Configuration ..................................................................................11
3.2.1 WAN Setting..............................................................................................12
3.2.1.1 WAN Setting --Static IP.........................................................................................14
3.2.1.2 WAN Setting --DHCP............................................................................................15
3.2.1.3 WAN Setting --PPPoE ...........................................................................................16
3.2.2. LAN Setting ..............................................................................................17
3.3 General configuration....................................................................................19
3.3.1 PABX Mode (Just use 2644 only).................................................................19
3.3.2.1 SIP Setting .............................................................................................20
3.3.3 SIP Advanced Setting.................................................................................23
3.3.4 Payload Type Setting..................................................................................25
3.3.5 Line Setting...............................................................................................26
3.3.6 Qos Setting ...............................................................................................29
3.7 Speed Dial Setting ........................................................................................30
3.3.7.1 Speed Dial ..............................................................................................30
3.3.7.2 Peer to Peer call ......................................................................................31
3.3.8 Caller ID Setting ........................................................................................32
3.3.9 CDR Setting...............................................................................................34
3.3.10 Syslog Setting..........................................................................................35
3.4 Advanced Configuration ................................................................................37
3.4.1 System setting...........................................................................................37
3.4.2 SNTP Setting .............................................................................................41
3.4.3 Codec Setting............................................................................................42
3.4.4 Voice Setting .............................................................................................44
3.4.5 Tone Setting..............................................................................................46
3.4.6 Phone Setting............................................................................................48
3.4.7 Digit Manipulation......................................................................................50
3.4.8 Dial Plan....................................................................................................51
3.5 Management................................................................................................53
3.5.1 Provision Server.........................................................................................53
3.5.2 Save-Reload setting ...................................................................................54
3.5.3 Upgrade Firmware......................................................................................55
3.5.3.1 Updating the firmware by FTP..................................................................56
3.5.3.2 Updating the firmware by TFTP................................................................57
1

26xx Technical Manual EN-V105
3.5.3.3 Updating the firmware by HTTP................................................................58
3.5.4 Reset to Default.........................................................................................59
3.5.5 Network Status..........................................................................................60
3.5.6 Version Info...............................................................................................61
3.5.7 Port Status ................................................................................................62
3.5.8 Password...................................................................................................63
3.6 Rebooting the system ...................................................................................64
Appendix A........................................................................................................65
Peer to Peer mode (FXOÅÆFXS) .......................................................................65
Appendix B........................................................................................................69
Peer to Peer mode (FXSÅÆFXS)........................................................................69
2

26xx Technical Manual EN-V105
1. Introduction
1.1 26xx Telephony Gateway
The Wellgate 26xx is an 4 to 8-ports FXS/FXO VoIP gateway which includes
1-WAN/4-LAN 10/100 base-T NAT router to meet the current network
environment. Field-proven quality of Voice communication and Fax transmission
over IP broadband access network to makes Wellgate 26xx series to be an
excellent solution for various VoIP applications.
1.2 Benefits
zIdeally suited for Enterprise use, rich-feature designed to inter-work with
IP-PBXs for small and middle enterprises.
zCarrier-grade features are supported and tested to be fully interoperable with
leading Soft-Switches.
zProvide CDR for call shop application.
zSuperb device for apartment VoIP service.
1.3 Physical Interface
zEthernet port (RJ-45, 10/100 base-T)
¾1-WAN port, for connect to router, ADSL modem (ATU-R), or switch hub
directly.
¾4-LAN port, for PC or other network devices connecting.
zTelephony port (RJ-11) --- depending on different models
¾8-FXS ports, to connect with analog phone
¾8-FXO ports, to connect with PSTN
¾4-FXO/4FXS ports, to connect with PSTN and analog phone
¾4 FXO ports, to connect with PSTN
¾4 FXS ports, to connect with phone
zReset button (Factory Default)
zAC power Jack
zStatus indicated LED
Indicates Ethernet, FXS, and SIP system status
3

26xx Technical Manual EN-V105
1.4 Specification
zIP Network connection
¾IPv4 (RFC 791)
¾MAC Address (IEEE 802.3)
¾PPPoE Client (RFC 2516)
¾DNS Client
¾DHCP Client (RFC 2131)
¾DHCP Server (RFC 2131)
¾NAT (RFC 1631)
¾TCP/UDP (RFC 793/768)
¾ICMP (RFC 792)
¾RTP/RTCP (RFC 1889/1890)
¾SNTP (RFC 2030)
¾TFTP Client
¾Telnet Server
¾HTTP Server
¾QoS – 802.1Q Virtual LANs
¾DiffServ (RFC 2475) / ToS (RFC 791/1349)
zIP Telephony (VoIP)
¾SIPv2 (RFC 3261)
-Session Timer (RFC 4028)
-Privacy Mechanism (RFC 3323)
-Outbound proxy setting for increasing performance, productivity,
and security.
-SIP proxy redundancy- Support Primary and Secondary proxy.
¾Voice Codecs
-G.711 (a-Law/u-Law): 64k bits (PCM)
-G.723.1: 6.3k/5.3k bits
-G.729A: 8k bits (CS-SCELP)
¾VAD – Voice Activity Detection with Silence Suppression
¾CNG – Comfortable Noise Generation
¾Echo Cancellation (G.165/G.168)
¾Jitter Buffer – Adaptive & Configurable
¾Packet Loss compensation - increasing voice quality
¾DTMF: In-band, Out-of-band (RFC 2833), and SIP-Info
¾Caller Generation/Detection – FSK, DTMF
¾FAX transmission
4

26xx Technical Manual EN-V105
-G.711 pass-through
-T.38 Fax relay protocol
¾Tone Generation & Detection
-Ringing Tone
-Ring Back Tone
-Dial Tone
-Programming Tone
¾Call Features
-Call Hold
-Call Transfer (Blind & consultant)
-Call Forward (Unconditional / No Answer / Busy)
¾MWI – Message Waiting Indication
¾PSTN Routing Prefix (2644 only)
¾PSTN Bypass when network or system failure (2644 only)
¾IP line hunting
¾Adjustable volume level
zSecurity
¾HTTP 1.1 basic/digest authentication for WEB access
¾MD5 for SIP authentication (RFC 2069/2617)
¾Password protected Admin access authority
1.5 Setting and maintenance
zConfigure & Update method
-Web Browser (HTTP)
-Telnet
-FTP/TFTP
zSetting parameter Import /Export
zVoice announcement of IP address
zSyslog Client – Debug & CDR (Call Detail Record)
1.6 Environmental
zDimension: 35 ×242 ×160 mm (Desktop)
zWeight: 0.935kg (unit)
zOperating Temp. & Humidity
-Temp.: 0℃～45℃(32℉～113℉)
-Humidity: 10％～85% relative humidity, non-condensing
5

26xx Technical Manual EN-V105
zStorage Temp. & Humidity
-Temp.: 0℃～55℃(32℉～131℉)
-Humidity: 10％～95％relative humidity, non-condensing
zAC Power Adaptor:
-INPUT: AC100V-240V, 50/60Hz
-OUTPUT: DC 12V, 3.0A
zRegulatory Compliance: FCC (Part 15, Class B) & CE
2. Appearance
2.1 Front Panel: LED Indicators
Wellgate 2608
Wellgate 2680
Wellgate 2644
LED Description
Power When the power adapter is connected, the LED will light up
green.
Ready When system is startup successfully, the LED will light up
green.
Proxy When the gateway is registered successfully to a Proxy, this
will light up green.
WAN This will light up green when the gateway’s WAN port is
physically connected to the public internet. When data is
transmitted through this port, it will flash green.
The default IP of WAN port is 10.1.1.3.
6

26xx Technical Manual EN-V105
LAN (1-4) This will light up green when the gateway’s LAN port 1-4 is
physically connected to a local network (Refer to Rear Panel
section in page number for location of LAN port 1-4). When
data is transmitted through this port, it will flash green.
The default IP of LAN port is 192.168.123.123.
T1-T8 The status LED for FXS port 1-8, this will light up amber
orange when the connected phone’s handset is lifted, or when
the connected phone is engaged in a conversation. It will
flash amber orange when there is an incoming call.
L1-L8 The status LED for FXO port 1-8. When there is no PSTN
connected, this LED will become blinking. when PSTN is
connected and no talking, the LED will be off. When a line is
using, the LED will become light up.
2.2 Rear Panel: LED Indicators
Wellgate 2608
Wellgate 2680
Wellgate 2644
Item Description
Reset Press and hold over 5 seconds to reload factory default
setting, this will erase all the settings configured on the
gateway.
T1-T8 The RJ-11 FXS port 1-8, connects analog phone sets, trunk
7

26xx Technical Manual EN-V105
line in PABX.
L1-L8 The RJ-11 FXO port 1-8, connect to PSTN
T1/P1-T4/P4 It is a pair of FXO and FXS connector. The different is that the
when power off or application is crashed, the FXO and FXS will
be connected together automatically for local surviving.
LAN 1-4 10/100 Base-T RJ-45 socket for LAN port 1-4, connects to
local area network.
WAN 10/100 Base-T RJ-45 socket for WAN port, connects to wide
area network.
DC 12V The power socket, input AC 100V~120V; output DC12V.3A
8

26xx Technical Manual EN-V105
3. Environment Setup and IP Connection
First of all, connect your computer to Wellgate 26xx’s LAN port by using DHCP.
The IP address assign to your computer should be 192.168.123.x by default.
Once you can get the IP address from Wellgate 26xx, you can start the
configuration as below.
3.1 Configuration
Login to the WELLGATE 26XX web configuration menu
1. Open your WEB browser and key in the default IP address of the gateway
(http://192.168.123.123) in the Address box (see figure below).
3. You will see a pop-up window requesting username and password before you
can login to the web configuration menu. Username is “root” while password is
blank “ “ (see figure below).
9

26xx Technical Manual EN-V105
2. You will enter the main page of the web configuration interface after you
keyed in the username and password correctly (see figure below).
10

26xx Technical Manual EN-V105
3.2 Network Configuration
The following instructions will explain the configurations for setting up the WAN
port of the 26xx. There are in total three methods of connections: Static IP,
DHCP and PPPoE.
Note: You can retrieve the IP address of the WAN port by keying #126# on the
phone set that is connected to the FXS port of the gateway. You will hear an IVR
announcing the current IP address of the WAN port.
11

26xx Technical Manual EN-V105
3.2.1 WAN Setting
The table shown below describes the configuration items for 3 connection types
of network (Static IP, DHCP and PPPoE).
12

26xx Technical Manual EN-V105
WAN Setting
Item Description Static IP DHCP PPPoE
Connected mode Select the connection method
for the WAN port of the 26xx,
you can choose the following:
zStatic IP
zDHCP
zPPPoE
V V V
Current IP Address Show current IP address V V V
DNS server mode Select the DNS behavior, you
can choose the following:
zAuto
zManual
“DNS auto” will retrieve the
DNS information sent from
the DHCP server.
“Manual” will look at the
specified Primary and
Secondary DNS address.
V V V
Primary DNS address
Specify the address of the
Primary DNS. V V V
Secondary DNS
address Specify the address of the Secondary DNS. V V V
WAN Link Speed Select the connection speed
for the WAN port of the 26xx,
you can choose the following:
zAuto
z100M
z10M
V V V
HTTP port for WEB
management Specify the port number for WEB management, the
allowable range is
80,1024~65535.
V V V
IP address Specify the IP address. V
Subnet mask Specify the subnet mask. V
13

26xx Technical Manual EN-V105
WAN Setting
Item Description Static IP DHCP PPPoE
Default gateway Specify the IP address of the
default gateway. V
Remote access
restriction Restricts/Blocks users connecting to the WAN port’s
IP remotely, you can
Enable/Disable this option.
V V V
PPPoE userID Specify the username of the
PPPoE account V
PPPoE password Specify the password
associated to the PPPoE
account above. V
Reboot after remote
host disconnection When the remote host (PPPoE) fails, the gateway
will retry 3 times to
reconnect, if there is no reply
from the remote host within 3
tries, then the gateway will
reboot. You can
Enable/Disable this option.
V
3.2.1.1 WAN Setting --Static IP
14

26xx Technical Manual EN-V105
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.
3.2.1.2 WAN Setting --DHCP
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.
P.S. When you are using DHCP in WAN and not connected, please make
sure you connect Ethernet before use PC to connect to LAN port.
15

26xx Technical Manual EN-V105
3.2.1.3 WAN Setting --PPPoE
1. Input PPPoE user ID and password
2. Press the “Apply” button (at the bottom) after you finish to save changes.
3. Press the “CANCEL” button (next to the Apply button) to clear the values in
the page.
4. Press the “Reboot” button to apply the changes.
16

26xx Technical Manual EN-V105
3.2.2. LAN Setting
LAN Setting
ITEM Description
LAN IP address Specify the IP address of the 26XX LAN
port.
LAN mask address Specify the mask address for 26XX
LAN port.
DHCP server Enable/Disable DHCP function on
the LAN port. Once enabled, the LAN
ports will function as a DHCP server,
network devices connected to them
will be issued with IP addresses.
IP address from When DHCP is enabled, you can
specify the IP address to start from
when assigning to attach network
devices.
IP address to When DHCP is enabled, you can
specify the ending IP address assigned
to the attached network devices.
17

26xx Technical Manual EN-V105
LAN Setting
ITEM Description
Domain Name You can specify the domain name that
will be assigned by the DHCP server to
the attached network devices. The
DHCP server will send information on
the “server host name” to the DHCP
client.
Lease time(sec) You can specify the maximum lease
time of the IP address allocated to the
DHCP client.
DNS server mode Select the DNS behavior, you can
choose the following:
zAuto
zManual
“DNS auto” will retrieve the DNS
information sent from the DHCP
server.
“Manual” will look at the specified
Primary and Secondary DNS address.
Primary DNS address Specify the address of the Primary
DNS.
Secondary DNS address Specify the address of the Secondary
DNS.
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.
18

26xx Technical Manual EN-V105
3.3 General configuration
To make VoIP calls, you will need a SIP account provided by the SIP
Proxy you are registered with. To configure the relevant SIP settings,
please refer to the instructions explained below.
3.3.1 PABX Mode (Just use 2644 only)
This quick setting is dedicated to be used for Wellgate 2644 to become a
inter-connection in between PSTN and traditional PABX. The call scenario will be
working as below:
1. For FXO incoming call, it will route to corresponding FXS directly (1 by 1)
2. For FXS outgoing call, it will route to VOIP except those prefix set in FXO
dialing Prefix.
3. For VOIP incoming call, it will route to FXS based on the called number
4. When VOIP call is failed to be called out such as register fail or network
issue, the call will be route to FXO as backup.
5. When Wellgate 26xx is malfunction or power failure, the all call will be
directly bypassed to FXO.
PABX Connection To enable PABX behavior or not.
SIP Setting Please refer to 3.3.2.1
Representative Number Only It is used (Yes) when you only have 1
SIP account and would like to be
shared for all FXS lines. Please refer to
19