Wen 34027EX User manual

Model # 34027EX
12 IN. WOOD LATHE
TABLE EXTENSION
bit.ly/wenvideo
Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years
of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings,
and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe,
reliable service.
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
[email protected]
WENPRODUCTS.COM
(M-F 8AM-5PM CST)

TABLE OF CONTENTS
Technical Data 2
3
4
5
6
6
7
General Safety Rules
Specific Safety Rules For Wood Lathes
Electrical Information
Assembly
Exploded View & Parts List
TECHNICAL DATA
34027EX
23.5 inches
41.5 inches
23.5 x 8 x 7 in.
17.5 lbs.
2
Model Number:
Length of Extension:
Length of Lathe w/ Extension:
Dimensions:
Weight:
Warranty
Compatible with the WEN 12-Inch Variable Speed Wood Lathes
(models 3427 & 34027)

3
ASSEMBLY
INSTALLING BED EXTENSION
1. Fit the bed extension (3) to the bed using four socket
head screws and four flat washers.
2. Remove the end stop screw (2) from the bed and as-
semble it onto the bed extension.
3. Make sure the tail stock (1) slides freely across the
connection point.
1
2
3
MOuNTING ThE LAThE TO A BENchTOp
For effective and safe operation, the lathe should be
mounted to a bench table, removing the feet and using
the six threaded holes in its base to bolt it to the surface.
EXPLODED VIEW AND PARTS LIST
No PART NUMBER DESCRIPTION QTY
114 3427EX1-114 Bed Extension 1
115 3427EX1-115 Socket Head Screw 4
116 3427EX1-116 Washer 4
117 3427EX1-117 Hex Wrench 1
118 3427EX1-118 Foot 2

4
THANKS FOR
REMEMBERING