Westward 2MZU5 Service manual

Please read and save these instructions. Read through this owner’s manual carefully before
using product. Protect yourself and others by observing all safety information, warnings, and
cautions. Failure to comply with instructions could result in personal injury and/or damage to
product or property. Please retain instructions for future reference.
Operating Instructions and Parts Manual
2MZU5, 2MZU7, 2MZU9, 2MZV2, 2MZU1, ZMZU3
2MZW7, 2MZW9, 2MZX2, 2MZX4, 2MZW3, 2MZW5
Universal Disc-Mag Base Guard
Universal C-Clamp Base Guard
Form #242
Printed in China
09/08
Description
zProtects face and eyes against chips and liquid
burrs.
zUniversal positioning arm is flexible and will
lock at various positions.
zClear polycarbonate shield is effective when
protecting operators from flying debris.
zOptional: Powerful magnet disc base or C-
Clamp base available.
z3/16” & 1/8” thickness shields are available in
different sizes.
Disc Mag Base C-Clamp Base
Specifications
2MZU5 6” x 8” x 1/8” Shield with Disc Mag Base
2MZU7 6” x 8” x 3/16” Shield with Disc Mag Base
2MZU9 8” x 10” x 1/8” Shield with Disc Mag Base
2MZV2 8” x 10” x 3/16” Shield with Disc Mag Base
2MZU1 10” x 12” x 1/8” Shield with Disc Mag Base
2MZU3 10” x 12” x 3/16” Shield with Disc Mag Base
2MZW7 6” x 8” x 1/8” Shield with C-Clamp Base
2MZW9 6” x 8” x 3/16” Shield with C-Clamp Base
2MZX2 8” x 10” x 1/8” Shield with C-Clamp Base
2MZX4 8” x 10” x 3/16” Shield with C-Clamp Base
2MZW3 10” x 12” x 1/8” Shield with C-Clamp Base
2MZW5 10” x 12” x 3/16” Shield with C-Clamp Base
Model S
p
eci
f
ications

2MZU5, 2MZU7, 2MZU9, 2MZV2, 2MZU1, ZMZU3
2MZW7, 2MZW9, 2MZX2, 2MZX4, 2MZW3, 2MZW5
Westward Operating Instructions and Parts Manual
2
Universal Disc-Mag Base Guard
Universal C-Clamp Base Guard
Installation
The flexible neck is shipped with slack which must be adjusted out prior to using the locking
lever. To do this:
1. Unlock Cam Lever.
2. Hold shield coupler in one hand and tighten tension cap until slight tension is felt
against the first ball joint (approx. ½”~ ¾” thread showing).
3. Test the hold by Re-locking the cam lever.
4. Repeat as necessary.
Applying too much torque to the knob to hold the shield may result in
cracking the shield. DO NOT OVERTIGHTEN!
Unlock
Locked
Tension
Cap
Shield
Cou
p
le
r
Manufactured for Grainger International, Inc.